User manual
Table Of Contents
- Introduction
- Preparations
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Splitting the Clips Freely (Clip Cutter Trig)
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
AGC Limit
For setting the maximum gain value of
“AGC”,
which electrically boosts the sensitivity level
according to the brightness automatically.
[Setting Values: 24dB, R18dB, 12dB, 6dB]
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when
auto iris is enabled.
[Setting Values: F5.6, F4, F2.8, F2, RF1.6]
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when
auto iris is enabled.
[Setting Values: F11, RF8, F5.6]
EEI Limit
For setting the shutter speed control range when
the Automatic Shutter mode (EEI) is enabled.
[Setting Values: 4F-stop, R3F-stop, 2F-stop]
Smooth Trans
For setting the shock reduction function, which
slows down the sudden change when switching
with the [GAIN]
or [WHT BAL] selection switch.
[Setting Values: Fast, Middle, Slow, ROff]
Memo :
0
However, this function is disabled when the
[FULL AUTO] switch is set to “ON”, or when
switching the gain selection switch that was set
to “AGC”.
GAIN L, GAIN M, GAIN H
For setting the gain value of each position on the
[GAIN]
selection switch.
This is fixed at “AGC” when the [FULL AUTO]
switch is set to “ON”.
[Setting Values: 24dB, 21dB, 18dB, 15dB, 12dB,
9dB, 6dB, 3dB, 0dB, -3dB, -6dB]
(Default values GAIN L: 0dB, GAIN M: 6dB, GAIN
H: 12dB)
Memo :
0
When [Shooting Mode] is set to
“Standard”,
“-3dB” and “-6dB” cannot be selected.
(A P
105 [ Shooting Mode ] )
AE LEVEL SW
For specifying the operation of the cross-shaped
button (HI) on the right side.
0
AE LEVEL/VFR:
Sets the number of frames during Variable
Frame
Rec, and operates as the AE level setting
button in other cases.
(A P84 [Variable Frame Rec] )
0
AE Level:
Operates as the AE level setting button at all
times.
0
Disable:
Disables the button.
[Setting Values: AE LEVEL/VFR, RAE Level,
Disable]
Handle Zoom Speed
This function allows you to set the zoom speed of
the
zoom lever at the handle when the [ZOOM FIX/
VAR/OFF] switch is set to “FIX”.
[Setting Values: 1 to 8 (R 5)]
AF Speed
For setting the AF operation speed.
[Setting Values: Fast, RMiddle, Slow]
AF Assist
For setting whether to shift the auto focus point
when the focus ring is turned during Auto Focus
(AF).
0
Area:
This option allows you to shift the auto focus
point to the left, center, right, or near and far
directions by turning the focus ring during AF.
Selecting this option displays the icon in
the area.
0
Far/Near:
This option allows you to shift the auto focus
point to near and far directions by turning the
focus ring during AF.
0
Off:
Sets the AF Assist function to “Off
”.
[Setting Values: Area, Far/Near, ROff]
(A
P50 [AF Assist Function] )
Memo :
0
This setting is effective only when the
[FOCUS]
switch is set to “AUTO”.
0
The manual focus adjustment mode is
temporarily
activated by turning the focus ring in
the AF mode. If the focus ring is not operated for
a certain time, the camera recorder returns to the
AF mode.
User Switch Set...
For specifying user button related settings.
(A P
100 [User Switch Set Item] )
99
Menu Display and Detailed Settings