User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Handle Zoom Speed F
This function allows you to set the zoom speed of
the zoom lever at the handle when the [ZOOM FIX/
VAR/OFF] switch is set to “FIX”.
[Setting Values: 1 to 8 (R 5)]
* When the supplied lens is not attached, “---” is
displayed and selection cannot be made.
AF Speed F
For setting the AF operation speed.
[Setting Values: Fast, RMiddle, Slow]
AF Assist F
For setting whether to shift the auto focus point
when the focus ring is turned during Auto Focus
(AF).
* When the supplied lens is not attached, “---” is
displayed and selection cannot be made.
0
Area:
This option allows you to shift the auto focus
point to the left, center, right, or near and far
directions by turning the focus ring during AF.
Selecting this option displays the icon in
the area.
0
Far/Near:
This option allows you to shift the auto focus
point to near and far directions by turning the
focus ring during AF.
[Setting Values: Area, Far/Near, ROff]
(A P54 [AF Assist Function F] )
Memo :
0
This setting is effective only when the [AUTO
FOCUS/11] switch is set to “ON”.
0
The manual focus adjustment mode is
temporarily activated by turning the focus ring in
the AF mode. If the focus ring is not operated for
a certain time, the camera recorder returns to the
AF mode.
Remote Func. Change F
For setting whether to enable focus operation when
performing zooming from a wired remote control.
[Setting Values: Zoom → Focus, ROff]
Memo :
0
This function is effective only if a wired remote
control is connected to the [REMOTE2]
terminal.
Lens REC (Displayed only when KA-F790G is
connected) A B
For setting the function of the [REC] button on the
lens.
0
Intercom:
Functions as an ON/OFF button for headset
calls.
Pressing the button each time toggles headset
call between on/off.
Press and hold down the button to turn on
headset call. Release to turn off.
0
Rec:
Functions as a recording button to start or stop
recording.
[Setting Values: Intercom, RRec]
User Switch Set...
For specifying user button related settings.
(A P111 [User Switch Set Item] )
FULL AUTO...
For setting which feature to set to auto when the
[FULL AUTO] switch on the camera recorder is
“ON”.
(A P113 [FULL AUTO Item] )
110
Camera Function Menu
Menu Display and Detailed Settings