User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
0
When the date/time is hidden while the menu
screen, status screen or other screen is
displayed, the date/time during this period will
not be recorded to the video. A confirmation
screen appears if you try to display the menu
screen or status screen during recording.
0
When [System] is set to “HD+Web” or “HD+SD”,
the shooting date/time information cannot be
recorded to the image to be recorded in slot B.
0
When [Record Format] B [System] is set to
“HD(SDI In)” or “SD(SDI In)”, [Time Stamp]
cannot be set to “On”.
Clip Set
9
Clip Name Prefix
For setting the first four characters of the name of
the clip file to be recorded to the SD card.
Enter any of the 38 characters including alphabets
(upper case), numbers (0 to 9), “_” (underscore),
and “-” (hyphen) using the software keyboard.
(A P105 [Text Input with Software Keyboard] )
[Setting Values: xxxG] (The default value of xxx is
the last three digits of the serial number.)
Memo :
0
When [Main Menu] B [System] B [Record Set]
B [Record Format] B [WFormat] is set to
“AVCHD”, this setting is not reflected in the file
name of the clip.
However, it is recorded as the display name of
the clip in the thumbnail display.
9
Reset Clip Number
For assigning a new number (Clip Number) by
resetting it (0001).
Select [Reset] and press the Set button (R) to reset
the number.
When [WFormat] is set to “AVCHD”, the clip
number is reset to “00000”.
When other clips exist on the SD card, the smallest
available number is used after reset.
0
Example:
If the [Clip Name Prefix] is “ABCD”, and
“ABCD0001” already exists on the SD card,
“ABCD0002” will be assigned.
Clear Planning Metadata
Erases the planning metadata downloaded from
the FTP server.
Network/Settings Item
For specifying network-related settings.
The display of the software keyboard for input
varies according to the item you are setting.
(A P105 [Text Input with Software Keyboard] )
Web
For setting the functions that make use of the web
browser.
9
Web Access
To access via a web browser, set to “On”.
[Setting Values: ROn, Off]
9
Camera Name
For setting the name displayed on the web
browser. Enter not more than 8 characters using
the software keyboard.
0
Default value:
HM890 A B
HM850 C D
9
Login Name (Fixed)
The login name is “prohd”. It cannot be changed.
9
Login Password
Changes the password for accessing via a web
browser.
The current password is displayed. Enter a new
password directly.
Enter not more than 31 characters using the
software keyboard.
Live Streaming Set
For specifying settings for distributing live video
images.
Memo :
0
Users cannot access this menu in the following
cases.
0
When [Record Format] B [System] is set to
“HD+SD” or “HD+Web”
0
When [Record Format] B [Frame & Bit
Rate] is set to “24p”
System Menu
137
Menu Display and Detailed Settings