User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
E
Resolution
Displays the video image resolution.
Memo :
0
This item is not displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [Record
Format] is set to “Off”.
(A P122 [ Record Format ] )
F
Frame Rate/Bit Rate
Displays the frame rate and bit rate in pairs.
Memo :
0
This item is not displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [Record
Format] is set to “Off”.
(A P122 [ Record Format ] )
G
Audio Level Meter
0
Displays the audio levels for CH-1 to CH-4.
0
a appears on the screen when in the Auto
mode.
.
0
When [Rec Mode] B [Rec Mode] is set to
“Frame Rec”, “Interval Rec”, or “Variable
Frame”, audio cannot be recorded and the
audio level meter is grayed out.
.
Memo :
0
This item is not displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [Audio Meter]
is set to “Off”.
(A P123 [ Audio Meter ] )
H
Histogram Display
This item is displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [Histogram] is
set to “On”.
(A P123 [ Histogram ] )
Memo :
0
When the histogram is displayed, the audio level
meter display is turned off temporarily.
I
GPS Mark
When [Main Menu] B [System] B [GPS] is set
to “On”, the signal reception status is displayed.
(A P130 [ GPS ] )
Memo :
0
The display changes according to the signal
reception sensitivity. If signals cannot be
received, the H mark appears in yellow.
0
This item is not displayed when [GPS] is set to
“Off”.
J
Volume Operation Indicator
This item is displayed when the LCD BRIGHT
and LCD PEAKING values (-10 to +10) are
changed.
.
LCD BRIGHT
LCD PEAKING
-10
0
K
Flash Band Correction Mark
This item is displayed when [Main Menu] B
[Camera Function] B [Flash Band Correction] is
set to “On”.
(A P108 [ Flash Band Correction ] )
L
Image Stabilizer Icon F
Displayed when the image stabilizer is ON.
i
: When [Level] of [OIS] is set to
“Normal”.
j
: When [Level] of [OIS] is set to
“High”.
Memo :
0
If image stabilizer is set to “OFF” when the
Display 0 screen is displayed, h appears for 3
seconds.
0
Displayed in the Display 0 screen only when
there is a change.
Display Screen in Camera Mode
147
Display/Status Screen