User Manual

5
Start and stop recording on the camera
recorder.
0
The input signals are output in the HD-
SDI/SD-SDI format from the video output
terminals.
0
“SDI IN Z” appears on the display screen.
.
P13000K
1/100
F1. 6
0
dB
AE+6
ND 1 /6 4
12 :34 :56
Jan 24,2014
00:00: 00.00
5 . 6 f t
SDI IN Z
SDI IN
Z
Memo :
0
Checking of the recording (clip review) is
disabled while you are recording external video
signals.
0
Do not disconnect the cables connecting to the
input terminal while recording is in progress.
0
The “Z” mark blinks when the format of the input
signal is different from the format selected in
step 4, or when there is no signal input.
Inputting External
Synchronizing Signals
(Genlock)
0
A [GENLOCK] terminal is available on the side
of the camera recorder.
0
You can input synchronizing signals from a
KA-M790G unit (Multicore Remote Adapter:
sold separately) that is connected to the
accessory connection terminal (68 pins) on the
rear of the camera recorder. A B
0
SDI signals (digital signals) can be input from the
[HD/SD SDI IN] terminal on the side. A B
0
Input external synchronizing signals from the
[GENLOCK] terminal and [HD/SD SDI IN]
terminal (A B), and synchronize the
camera video or playback image with the
external signal.
0
The H (Horizontal) Phase of the camera
recorder’s video signals can be adjusted with
respect to the external synchronizing signals on
the [A/V Set] B [Video Set] B [Genlock Adjust]
screen.
(A P126 [ Genlock Adjust ] )
Memo :
0
The genlock feature is only usable in the Camera
mode.
Genlock Signal Settings
For analog signal input
o Synchronizing signal used
SD synchronizing
signal
: BB (Black Burst) signal
Supports SMPTE170M
(RS-170A)-NTSC
Supports ITU-R BT.470-6 PAL
HD synchronizing
signal
: HDTV tri-level synchronizing
signal
Supports SMPTE296M-HD720p
Supports SMPTE274M-
HD1080i
.
GENLOCK
Video
Equipment
External Synchronizing Signal
External Synchronizing Signal
SYNC Signal
Generator
Inputting SDI Signals from an External Device A B
169
Connecting External Devices