User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Setting Distribution
1
Set the [Record Format] according to the
resolution and frame rate of the video to be
distributed.
.
480x270
30p
25p
30p
30p
25p
720x
480
720x
576
30p
25p
25p
Record Format
Resolution/No. of Frames
1280x720
720x480
720x576
1920x
1080
60i,30p
60i
50i,25p
50i
1440x
1080
60i
60i
50i
1280x
720
60p,30p
60i
50p,25p
50i
60i
60i
50i
50i
1920x1080
50i
60i
50i
60i
50i
30p(*)
25p(*)
30p(*)
30p
25p
25p(*)
Settable Resolution during
Streaming/No. of Frames
* This item cannot be selected when [Main Menu]
B [System] B [Record Set] B [Record Format] B
[System] is set to “HD(SDI In)”.
Memo :
0
Live streaming cannot be performed in the
following cases.
0
When [Main Menu] B [System] B [Record
Set] B [Record Format] B [System] is set to
“HD+SD” or “HD+Web”
0
When [Main Menu] B [System] B [Record
Set] B [Record Format] B [WFrame & Bit
Rate] is set to “24p”
2
Set the Resolution and Frame & Bit Rate for
the video to be distributed.
Specify the settings in [Main Menu] B [System]
B [Network]/[Settings] B [Live Streaming Set].
(A P137 [ Live Streaming Set ] )
3
Set the distribution protocol.
Specify the settings in [Main Menu] B [System]
B [Network]/[Settings] B [Live Streaming Set]
B [Type].
(A P139 [ Type ] )
4
Set items related to the distribution
protocol.
Set each of the [Main Menu] B [System] B
[Network]/[Settings] B [Live Streaming Set] B
[UDP/TCP Settings]/[RTSP/RTP Settings]/
[ZIXI Settings] items.
(A P139 [ UDP/TCP Settings ] )
(A P139 [ RTSP/RTP Settings ] )
(A P139 [ ZIXI Settings ] )
Starting Distribution
1
Perform the necessary settings for the
decoder device or the PC application.
For details on the settings, please refer to the
instruction manual of the respective devices
and applications.
Memo :
0
If there is an NAT router within the
communication path between the camera and
the decoder, port forwarding setup is required.
For details on the settings, please refer to the
instruction manual of the router in use.
0
The following parameters are required when
connecting to this camera recorder using the
RTSP/RTP.
Port number: 554
Stream ID: stream
0
Use the following to access via URL.
rtsp://<IP address of the camera recorder>:554/
stream
2
With the network connection established,
set [Live Streaming] to “On”.
(A P174 [Preparing Network Connection] )
0
Set [Main Menu] B [System] B [Network]/
[Settings] B [Live Streaming Set] B [Live
Streaming] to “On”.
0
The network connection mark appears on
the display screen when a network
connection is established.
.
100min
50min
282min
P13000K
1/100
F1. 6
0
dB
AE+6
ND 1 /64
5 . 6 f t
12 :34 :56
Jan 24 , 2014
00: 00:00.00
1920x1080
60 i HQ
200
Performing Live Streaming
Connecting to the Network