User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Error Message Status Action
Record Format Incorrect Video format of the file for Clip
Review is different from the current
[WResolution] and [WFrame & Bit
Rate] setting.
Set [WResolution] and [WFrame &
Bit Rate] correctly.
(A P133 [ W Resolution ] )
(A P133 [ W Frame & Bit Rate ] )
Media Full
0
[REC] button is pressed when
the media in use has no
remaining space.
0
Remaining space ran out during
recording.
Replace the SD card with a new
one.
No Clips No viewable clips are found on the
card for Clip Review.
Insert an SD card that contains clips
that can be reviewed.
(A P43 [SD Card] )
(A P83 [Viewing Recorded
Videos Immediately (Clip
Review)] )
No Media [REC] button is pressed when an SD
card is not inserted.
Insert an SD card.
(A P43 [SD Card] )
No Media No SD card is found in Media mode
or when the thumbnail screen is
displayed.
Insert an SD card.
(A P43 [SD Card] )
No Clips No clips are found on the inserted
SD card in Media mode or when the
thumbnail screen is displayed.
Insert an SD card that contains
playable clips.
(A P43 [SD Card] )
(A P94 [Playing Recorded
Clips] )
12h Continuation Record The continuous recording time in
AVCHD mode exceeds 12 hours
and recording stops automatically.
To continue recording, press the
[REC] button again.
Memo :
0
Please see below for error messages when auto white balance adjustment failed to complete.
(A P64 [Adjusting the White Balance] )
List of FTP Transfer Errors
If the upload of a recorded clip or download of the metadata setup file (XML format) is not successfully
completed, the following errors are displayed.
Error message Status Action
Timeout. Transfer was discontinued due to
timeout caused by network
transmission or server failure.
0
Execute again.
0
Use a different server.
Media Was Removed. SD card is removed while FTP
transfer is in progress.
Insert the SD card and execute FTP
transfer again.
Adapter Was Removed. The USB network adapter is
removed while FTP transfer is in
progress.
Connect the USB network adapter.
Cannot Connect to Server. Unable to connect to the FTP server. Adjust the Server and Port settings
for [Metadata Server] or [Clip
Server].
(A P140 [ Metadata Server ] )
(A P140 [ Clip Server ] )
Error Messages and Actions
203
Others