User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
J
[AUDIO OUTPUT CH-1/3, CH-2/4] Audio
Output Terminal (RCA)
Output terminal for audio signals.
0
Input audio signals are output during
Camera mode.
0
Playback audio signals are output during
Media mode.
0
In the SDI signal input mode, audio signals
superimposed with the SDI input are output.
Memo :
0
Alarm audio is not output.
K
[AUX] AUX Input terminal (φ3.5 Stereo Mini
Jack)
(A P69 [Audio Recording] )
L
[REMOTE2] Remote 2 Terminal
(A P164 [Connecting Wired Remote Control] )
M
Shoulder Pad Slide Button
For adjusting the shoulder pad position. Press
this button to adjust the shoulder pad N position
to the front or back.
N
Shoulder Pad
O
[DEVICE] USB Mini Terminal
(A P160 [Managing/Editing Clips on a PC] )
P
[HDMI] HDMI Output Terminal
(A P161 [Connecting External Monitor] )
SD Slot
(A P43 [SD Card] )
.
D
C
E
B
A
A
Card Slot A Status Indicator
B
[SLOT SELECT] Card Slot Selection Button
For switching the active card slot during
shooting and playback.
C
SD Card Cover
D
Card Slot B Status Indicator
E
[OPEN] SD Card Cover Open/Close Knob
Rear Terminal
.
A
A
B
C
A
Shoulder Belt Mount (x2)
For mounting a shoulder belt (sold separately).
Caution :
0
Be sure to use a shoulder belt with the strength
to withstand the weight of this camera recorder.
0
If the shoulder belt is not properly attached, the
camera recorder may fall and cause injuries.
0
Check the instruction manual provided with the
shoulder belt before using.
B
Accessory Connection Terminal A B
Terminal for connecting a KA-M790G
(Multicore Remote Adapter: sold separately) or
other units.
Memo :
0
When using this terminal, make sure that the
Battery Adapter C is removed.
C
Battery Loading Folder
The shape varies across the U and E models.
(A P31 [Using a Battery Pack] )
* The E model is used in the illustration here.
Names of Parts
25
Introduction