User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Selecting a Recording
Format
The following are steps to select the video
resolution, recording/playback file format, and
video format of videos recorded on this camera
recorder.
Selecting a Recording Format
1
Set the [System Frequency].
Select using [Main Menu] B [System] B
[System Frequency].
(A P131 [ System Frequency ] )
2
Select a recording format.
Set the following items in [Main Menu] B
[Record Format].
0
Slot A settings
0
Recording file format
(A P133 [ W Format ] )
0
Recording resolution
(A P133 [ W Resolution ] )
0
Number of recording frame/image quality
(A P133 [ W Frame & Bit Rate ] )
0
Number of recording audio channels
(A P133 [ W Audio ] )
0
Slot B settings (as needed)
(A P134 [ Y Format ] )
(A P134 [ Y Resolution ] )
(A P134 [ Y Frame & Bit Rate ] )
(A P134 [ Y Audio ] )
3
Select an aspect ratio for the SD video
recording (as needed).
Select an SD video aspect ratio when [System]
is set to “SD”, “HD+SD” or “SD(SDI In)”.
You can select “16:9” or “4:3”.
(A P135 [ SD Aspect ] )
Memo :
0
The aspect ratio is fixed at “16:9” when [System]
is set to “HD”“HD+Web” or “HD(SDI In)”.
4
After setting is complete for all items, press
the [OIS/1] button.
0
Switches the recording format.
0
A “Please Wait...” message appears on the
screen during switching.
Possible Slot A Setting Combinations
When [System] B [System Frequency] is set to
“60/30/24”
0
When [Record Format] B [System] is set to HD,
“HD+SD”, “HD+Web”, “HD(SDI In)” (U model)
0
When [Record Format] B [System] is set to HD,
“HD+Web”, “HD(SDI In)” (E model)
Record Format
W Format W Resolution W Frame &
Bit Rate
W Audio
QuickTime
MP4
MXF *1
(MPEG2)
1920x1080 60i (HQ) 4ch/
2ch
30p (HQ) *2
24p (HQ) *2
1440x1080 60i (HQ)
60i (SP)
1280x720 60p (HQ)
30p (HQ) *2
24p (HQ) *2
60p (SP)
AVCHD 1920x1080 60p (HQ) *2 2ch
60i (HQ)
60i (SP)
1440x1080 60i (LP)
60i (EP)
QuickTime
(H.264)
1920x1080 60p (XHQ) *2 4ch/
2ch
60i (XHQ)
30p (XHQ) *2
24p (XHQ) *2
60i (UHQ)
30p (UHQ) *2
24p (UHQ) *2
*1 The “1280x720” setting is not available for
MXF files.
*2 Not selectable in the “HD(SDI In)” setting.
0
When [Record Format] B [System] is set to
“SD”, “SD(SDI In)” (U model)
Record Format
W Format W Resolution W Frame &
Bit Rate
W Audio
QuickTime
(H.264)
720x480 60i 4ch/
2ch
50
Selecting a Recording Format
Shooting