User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Setting the Electronic
Shutter
You can change the shutter speed (time for each
shooting frame) using the electronic shutter
function. Electronic shutter can be adjusted
manually or automatically.
Manual Shutter Mode (Manual Shutter
Switching)
Use the Set button (R) to switch between the
shutter modes and the cross-shaped button (JK)
to switch between the speeds.
.
Switching Shutter Mode
Press the Set button (center of the cross-shaped
button) to turn ON/OFF the shutter.
Memo :
0
When the shutter is ON, “Step”, “Variable”, or
“EEI” may be selected using [Camera
Function] B [Shutter] menu. “Step” is the factory
default.
(A P108 [ Shutter ] )
Switching Shutter Speed
When shutter is ON, use the cross-shaped button
(JK) to set the shutter speed. Shutter speed differs
according to the video format and variable frame
rate settings.
Memo :
0
To display Shutter in angle (DEG), set [WFrame
& Bit Rate] to 25p(XHQ), 25p(UHQ), 25p(HQ),
24p(XHQ), 24p(UHQ), or 24p(HQ), and set
[Shutter] in [LCD/VF] B [Display Settings] to
“DEG”.
(A P133 [ W Frame & Bit Rate ] )
(A P124 [ Shutter ] )
During Modes Other Than Variable Frame Rec
.
720/60p
720/30p
1080/60i
1080/30p
720/50p
720/25p
1080/50i
1080/25p
720/24p
1080/24p
J ON
^^
1/10000
1/4000
1/2000
1/1000
1/500
1/250
1/500 1/500
1/120
1/100
1/120
1/60
1/100 1/100 1/50
1/60 1/50 1/48
1/30 1/25 1/24
1/15 1/12.5 1/12
K
1/7.5 1/6.25 1/6
J ON
~
1/60.00
~
K
1/30.07 1/25.05 1/24.05
OFF 1/60 1/50 1/48
1/10227
1/10843
1/54
1/10000 1/10000
1/250 1/250
1/120
1/1000 1/1000
1/2000 1/2000
1/4000 1/4000
1080/60p 1080/50p
1/48.00
1/50.00
(Lower limit)
Default values
(Upper limit)
(Standard)
(Variable)
(Step)
Resolution/
Frame Rate
Shutter
Memo :
0
The operations of the cross-shaped button
(JK) and Set button (R) are disabled in the
following cases.
0
During clip preview
0
During display of the USB switching
confirmation screen
0
During display of the formatting confirmation
screen
0
When selecting a face using face detection
0
When selecting a photometry area with [Spot
Meter] set to “Manual”
60
Setting the Electronic Shutter
Shooting