User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Adjusting Audio Recording Level
0
You can select to adjust the audio recording
levels for each of the four channels (CH-1/CH-2/
CH-3/CH-4) manually or automatically.
0
Set CH-1/CH-2 using the switch, and CH-3/
CH-4 using the menu.
.
For CH-1/CH-2
o Adjusting manually
1
Set the [AUDIO SELECT CH-1/CH-2 AUTO/
MANUAL] selection switch to “MANUAL”
for the channel to be adjusted manually.
2
Turn the [AUDIO LEVEL CH-1/CH-2]
adjustment knob corresponding to the
channel to adjust the level.
When [Audio Set] B [CH1 Limiter]/[CH2
Limiter] B [Threshold Level] is set to “Off”,
adjust such that the audio level meter does not
light up at -2 dB even for loud sounds.
(A P128 [ CH1/2 Limiter Mode ] )
.
P13000K
1/100
F1. 6
0
dB
AE+6
ND 1 /64
12 :34 :56
Jan 24 , 2014
00: 00:00.00
5 . 6 f t
4030 20
10
0
-2dB
2 Channels
4 Channels
Memo :
0
For the recorded audio, you can set items such
as [Threshold Level], [Attack Time] or [Decay
Time] in [CH1 Limiter] or [CH2 Limiter].
0
If [CH1 Limiter]/[CH2 Limiter] B [Threshold
Level] is set to a value other than “Off”, the limiter
operates according to the value set.
0
You can adjust the level manually during the
recording, recording standby, and stop modes.
(A P128 [CH1 Limiter/CH2 Limiter] )
0
Set the reference audio level of [CH-1] and
[CH-2] to be recorded on SD cards in the [Main
Menu] B [A/V Set] B [Audio Set] B [CH1/2 Ref.
Level] menu to “-20dB”, “-18dB”, or “-12dB”.
(common for CH-1/CH-2)
(A P127 [ CH1/2 Ref. Level ] )
o Adjusting automatically
Set the [AUDIO SELECT CH-1/CH-2 AUTO/
MANUAL] selection switch to “AUTO” or the [FULL
AUTO] switch to “ON” to enter Automatic
Adjustment mode. The audio recording level is set
automatically according to the input level.
Memo :
0
When the [FULL AUTO] switch is set to “ON”,
mode switching of the [AUDIO SELECT CH-1/
CH-2 AUTO/MANUAL] selection switch is
disabled.
0
When [Main Menu] B [A/V Set] B [Audio Set] B
[CH1 Limiter]/[CH2 Limiter] B [Threshold
Level] is set to “Off” while in the automatic
adjustment mode, the limiter operates at
-6dBFS.
0
If [CH1 Limiter]/[CH2 Limiter] B [Threshold
Level] is set to a value other than “Off”, the limiter
operates according to the value set.
(A P128 [CH1 Limiter/CH2 Limiter] )
0
When [Main Menu] B [Camera Function] B
[FULL AUTO] B [Audio] is set to “SW Set”, you
can switch the audio recording mode with the
[AUDIO SELECT CH-1/CH-2 AUTO/MANUAL]
selection switch on the camera recorder even
when the [FULL AUTO] switch is set to “ON”.
(A P114 [ Audio ] )
70
Audio Recording
Shooting