User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
TC/UB Menu
Menu screen for setting time code and user’s bit.
This item cannot be selected in the Media mode,
or during recording.
TC Preset
For setting the time code (hour, minute, second,
frame).
Display : Drop setting 02:02:25.20
: Non Drop setting 02:02:25:20
Memo :
0
When the [TC GENE.] switch is set to “REGEN”,
“REGEN” is displayed and preset is disabled.
(A P73 [Setting Time Code Generator] )
UB Mode
For setting the recording mode of the user’s bit.
0
Date:
Records the date.
0
Time:
Records the time.
0
SW Set:
Operates in the mode selected using the [TC
GENE.] switch.
(A P76 [Setting the User’s Bit] )
[Setting Values: Date, Time, RSW Set]
Memo :
0
If UB Mode is set to “Time”, the user’s bit
operates in the 24-hour format even if the LCD
display is in the 12-hour format.
9
Preset
For setting the user’s bit. (Digit by digit)
Display : AB CD EF 01
(A P76 [Presetting the User’s Bit] )
Memo :
0
When [UB Mode] is set to “Date” or “Time”, this
item appears as “---” and preset is disabled.
0
When the [TC GENE.] switch is set to “REGEN”,
“REGEN” is displayed and preset is disabled.
Drop Frame
For setting the framing mode of the time code
generator.
0
Non Drop:
Internal time code generator works in the non-
drop-frame mode. Use this setting when placing
emphasis on the number of frames.
0
Drop:
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop,
RDrop]
Memo :
0
Settable only when [Main Menu] B [System] B
[System Frequency] is set to “60/30/24”, and
[Main Menu] B [System] B [Record Set] B
[Record Format] B [WFrame & Bit Rate] is set
to “60p”, “30p”, or “60i”. When the frame rate is
“24p”, “Non Drop” becomes fixed and cannot be
selected.
0
When [Main Menu] B [System] B [System
Frequency] is set to “50/25”, “---” is displayed
and selection is disabled.
(A P133 [ W Frame & Bit Rate ] )
TC/UB Menu
119
Menu Display and Detailed Settings