User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Variable frame recording
Enables beautiful slow motion and quick motion
image recording such as overcrank and
undercrank.
Th ability to change the frame rate during recording
enables quick to gradually slow motion effects.
Pre Rec function (up to 10 seconds) and
Interval Rec function
SDI/HDMI Simultaneous Output
Equipped with both [HD/SD SDI] and [HDMI]
terminals as digital output.
Non-compressed full HD video signals and audio
signals can be output to the [HD/SD SDI] and
[HDMI] terminals at the same time.
Comes with genlock input and time
code input/output terminals
This camera recorder supports the use of multiple
cameras as well as studio use.
Professional Switch Layout and Various
Video Parameter Settings
Switches for Gain and White Balance are available
on the side panel to enable quick switching
according to the shooting scene.
Image parameters such as gamma and color
matrixes are also available in the menu for
adjusting preferred tones.
0.45-inch 1.22-megapixel color
viewfinder, 4.3-inch 1.15-megapixel
LCD display
(Equipped with Focus Assist function)
4-channel audio
Supports 4-channel audio in the MPEG-2/H.264
recording mode.
In addition to two mic inputs, you can also record
audio input from the [AUX] input terminal to an
independent track.
2-channel XLR audio input
(microphone/line switch, phantom
power supply) and mini jack input
terminal for wireless microphone
receiver
Supports two types of wired remote
control units
In addition to JVC’s original 6-pin remote terminal,
this camera recorder is also equipped with a
φ2.5mm stereo jack remote control terminal.
Built-in GPS
This camera recorder is built in with a GPS function,
which enables the positional information obtained
from the GPS satellite during a shoot to be
recorded as metadata.
* Note that acquisition of the positional information
may fail depending on the weather condition.
Diverse Network Functions
This camera recorder supports functions such as
remote control from a mobile device, viewing,
metadata transmission, and proxy file transfer as
an FTP client.
Equipped with a USB host function, you can upload
recorded files stored in this unit via a network by
connecting it to network devices such as a wireless
LAN adapter (optional). Video and audio streaming
is also supported.
Professional-spec battery
This camera recorder supports the use of batteries
used by broadcasting stations, such as Anton/
Bauer and IDX batteries.
(Gold Mount: For use with Anton/Bauer battery (U
model), V Mount: For use with IDX battery (E
model))
Application Software Provided
The [JVC ProHD Clip Manager] application
software is provided for you to copy recorded clips
to Windows or Macintosh computers and for
checking the video images. (For MP4 file format)
The disc provided with this camera recorder
comes with [JVC ProHD Clip Manager] and other
application software as well as their user guides.
* For details, refer to the user guides for each
application software.
Main Features
13
Introduction