User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
9
W Format
For selecting the format of the file to be recorded to
the SD card when [System] is set to “HD”.
For selecting the format of the file to be recorded to
the SD card in slot A.
(A P50 [Possible Slot A Setting Combinations] )
0
QuickTime(MPEG2):
QuickTime file format (.MOV)
0
MP4(MPEG2):
MP4 file format
0
MXF(MPEG2):
MXF (material exchange format)
0
AVCHD:
AVCHD file format
0
QuickTime(H.264):
QuickTime format (.MOV)
[Setting Values: RQuickTime(MPEG2),
MP4(MPEG2), MXF(MPEG2), AVCHD,
QuickTime(H.264)]
Memo :
0
When System is set to “SD”, this item is fixed at
“QuickTime(H.264)”.
9
W Resolution
For selecting the image size to be recorded to the
SD card in slot A. (Horizontal x vertical)
The available options vary according to the
[WFormat] and [System] settings.
(A P50 [Possible Slot A Setting Combinations] )
[Setting Values: R1920x1080, 1440x1080,
1280x720]
Memo :
0
When [System] is set to “SD” or “SD(SDI In)”,
this item is fixed as follows.
0
U model: Fixed at “720x480”
0
E model: Fixed at “720x576”
9
W Frame & Bit Rate
For selecting the recording frame rate and
encoding bit rate for the SD card inserted into slot
A.
The available options vary according to the settings
for [System Frequency], [System], [WFormat], and
[WResolution].
(A P50 [Possible Slot A Setting Combinations] )
[Setting Values: 60p (XHQ), 60i (XHQ), 60i (UHQ),
60p (HQ), 60i (HQ), 60p (SP), 60i (SP), 60i (LP),
60i (EP), 50p (XHQ), 50i (XHQ), 50i (UHQ), 50p
(HQ), 50i (HQ), 50p (SP), 50i (SP), 50i (LP), 50i
(EP), 30p (XHQ), 30p (UHQ), 30p (HQ), 25p
(XHQ), 25p (UHQ), 25p (HQ), 24p (XHQ), 24p
(UHQ), 24p (HQ)]
Memo :
0
The recording bit rate (video) is 50 Mbps in
“XHQ”, 35 Mbps VBR in “UHQ” and “HQ”, and
18.3 Mbps (25 Mbps in the case of 1080i) CBR
in “SP”.
0
The recording bit rate (system rate) is as follows
when [WFormat]/[YFormat] is set to “AVCHD”.
0
“HQ(60p)” and “HQ(50p)”: 28 Mbps VBR
0
“HQ(60i)” and “HQ(50i)”: 24 Mbps VBR
0
“SP”: 18 Mbps VBR
0
“LP”: 9 Mbps VBR
0
“EP”: 5 Mbps VBR
0
When [System] is set to “SD” or “SD(SDI In)”,
this item is fixed as follows for the different
models.
0
U model: “60i”
0
E model: “50i”
9
W Audio
For selecting the audio to be recorded to slot A (2ch
or 4ch). The selectable options vary according to
the [WFormat] setting.
(A P50 [Possible Slot A Setting Combinations] )
[Setting Values: R4ch, 2ch]
Memo :
0
When [WFormat] is set to “AVCHD”, this item is
fixed at “2ch”.
System Menu
133
Menu Display and Detailed Settings