User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
9
Live Streaming
Starts live distribution when “On” is selected.
[Setting Values: On, ROff]
Memo :
0
“On” cannot be selected if network connection
is not established.
0
“On” cannot be selected when FTP is running.
0
Live streaming switches to “Off” when the power
is turned off.
9
Resolution
For setting the resolution of the video image during
live distribution.
The camera recorder restarts when the setting is
changed.
The available options vary according to the settings
for [WResolution] and [WFrame & Bit Rate] under
[Record Format].
W Resolution
No. of Frames for
WFrame & Bit
Rate
Setting
values
(R: default
value)
1920x1080,
1440x1080
60p, 60i, 30p R1920x1080,
1280x720,
720x480,
480x270
50p, 50i, 25p R1920x1080,
1280x720,
720x576,
480x270
1280x720 60p, 30p R1280x720,
720x480,
480x270
50p, 25p R1280x720,
720x576,
480x270
720x480 (U
model)
60i 720x480,
480x270
720x576 (E
model)
50i 720x576,
480x270
Memo :
0
The settings cannot be changed during live
streaming or recording.
0
When [System] B [Record Set] B [Record
Format] B [SD Aspect] is set to “4:3”, the aspect
ratio of the live streaming image becomes “4:3”.
9
Frame & Bit Rate
For setting the frame rate and encoding bit rate of
the video image during live distribution.
The available options vary according to the settings
for [Resolution] above, as well as [WFrame & Bit
Rate] under [Record Format].
No. of Frames for
W
Frame & Bit
Rate
Resolution
Setting values
(R: default value)
60p, 60i, 30p 1920x1080 R60i (8.0 Mpbs),
60i (5.0 Mpbs),
60i (2.5 Mbps)
1280x720 R30p (5.0 Mpbs),
30p (3.0 Mpbs),
30p (1.5 Mbps)
720x480 60i (5.0 Mpbs),
R60i (3.0 Mpbs),
60i (1.5 Mbps),
60i (0.8 Mbps),
60i (0.3 Mbps),
60i (0.2 Mbps)
480x270 30p (0.2 Mbps)
50p, 50i, 25p 1920x1080 R50i (8.0 Mpbs),
50i (5.0 Mpbs),
50i (2.5 Mbps)
1280x720 R25p (5.0 Mpbs),
25p (3.0 Mpbs),
25p (1.5 Mbps)
720x576 50i (5.0 Mpbs),
R50i (3.0 Mpbs),
50i (1.5 Mbps),
50i (0.8 Mbps),
50i (0.3 Mbps),
50i (0.2 Mbps)
480x270 25p (0.2 Mbps)
Memo :
0
The settings cannot be changed during live
streaming.
0
An encoding bit rate exceeding 5.0 Mbps cannot
be selected when [Type] is set to “RTSP/RTP”.
0
An encoding bit rate exceeding 3.0 Mbps cannot
be selected when [Type] is set to “ZIXI”.
138
System Menu
Menu Display and Detailed Settings