User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
O
Cross-Shaped Button (JKHI)/Set Button (R)
The function changes according to the
operation status of the camera recorder.
o During menu operation (all modes)
(A P103 [Basic Operations in Menu Screen] )
Center Set button (R) : Confirms menu items
and setting values
Cross-shaped button
(JK)
: Selects menu items
and setting values
o During Camera mode
Shutter operation:
Center Set button (R) : Shutter ON/OFF
Cross-shaped button
(JK)
: Switches shutter
speed when shutter
is ON
Cross-Shaped Button
(HI)
: AE level operation
Memo :
0
When [Camera Function] B [AE LEVEL SW] is
set to “AE LEVEL/VFR”, the cross-shaped
button (HI) is used to set the number of frames
during Variable Frame Rec.
(A P93 [Variable Frame Rec] )
(A P109 [ AE LEVEL SW ] )
P
[LOAD FILE/3] Load File/User 3 Button
Displays the screen for retrieving a picture file.
You can also use it as a user button by assigning
a specific feature in the menu setting to this
button.
(A P158 [Loading a Setup File] )
(A P42 [Assignment of Functions to User
Buttons] )
Q
[MONITOR] Audio Monitor Level Adjustment
Knob
For adjusting the volume of the monitor speaker
and earphone.
Viewfinder
(A P40 [Adjusting the Viewfinder] )
.
ED
A
C
B
A
Viewfinder Slide Lock Ring
For loosening the ring and adjusting the position
of the viewfinder D to the left or right.
B
Eyepiece Focus Ring
For adjusting the visibility.
C
Viewfinder Eyepiece Lock Ring
For loosening the ring and adjusting the
eyepiece position of the viewfinder to the front
or back.
D
Viewfinder
E
Eyepiece
Prevents external light from entering the
viewfinder screen and cameraman’s vision.
Names of Parts
23
Introduction