User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Display Screen (VF/LCD) in Media Mode
(A P151 [Display Screen in Media Mode] )
0
This is the screen display during clip playback in
Media Mode.
0
The display switches between three screen
types with every press of the [DISPLAY] button.
(Display 0 B 1 B 2 B 0)
.
1000/ 2000
12 :34 :56
Jan 24 , 2014
00: 00:00.00
1920x1080
60 i HQ
1000/ 2000
282min
12 :34 :56
Jan 24,2014
00: 00:00.00
1920x1080
60i HQ
1000/ 2000
Display 2 screen
Display 1 screen
Display 0 screen
Status Screen
0
This screen allows you to check the current
settings.
0
To display the status screen, press the
[STATUS] button in the normal screen.
0
The status display differs according to the
operation mode (two types).
(A P18 [Operation Modes] )
0
Press the [STATUS] button to switch to the
display screen.
0
Press the [MENU] button at each status screen
(other than the [Camera] and [Audio Level]
screen) to enter the setting screen.
0
Use the cross-shaped button (HI) to switch
screens as follows:
.
192.168.0.1
HM890
Zebra
USER7
USER6
None
None
USER5
Focus Assist
USER4
Load Picture File
USER3
Marker
USER2
OIS
USER1
USER Switch Set
Live Streaming
MAC Address
IP Address
Passphrase
WPA2
Security Type
SSID
P2P
Ty p e
Network
Creator
Description
Title2
Title1
Planning Metadata
Mix
CH1/2
Audio Level
Audio
4ch
4ch
Audio
Audio
60i(HQ)
60i(HQ)
1920x1080
1920x1080
QuickTime(MPEG2)
QuickTime(MPEG2)
Format
Format
Record Format
Histogram
Off
Safety Zone
16:9
Aspect Marker
Zebra 2
Zebra 1
LCD/VF
AE Level
AE LEVEL SW
12dB
GAIN H
6dB
GAIN M
0dB
GAIN L
None
FAW
Standard
Shooting Mode
Camera
Displays on the LCD Monitor and Viewfinder
37
Preparations