User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Acquiring Positioning
Information by GPS
This camera recorder comes with a built-in GPS
function. The GPS function is able to record the
positioning information.
During playback, you can also display the recorded
information on the playback screen.
(A P98 [Playing back] )
1
Set [Main Menu] B [System] B [GPS] to
“On”.
0
Positioning starts when the H icon on the
display screen starts blinking.
0
After positioning is complete, the H icon
switches to a solid light and records the
positioning information during shooting.
0
The icon that appears on the screen
changes according to the condition of signal
reception from the GPS satellite.
0
The GPS function is able to record the
positioning information. However, the date/
time information (atomic clock) can be
recorded only when [Format] is set to
“AVCHD” on the slot to record to.
.
P13000K
1/100
F1. 6
0
dB
AE+6
ND 1 /64
12 :34 :56
Jan 24 , 2014
00: 00:00.00
5 . 6 f t
Display
Reception
Status
Positioning Status
.
(Yellow)
[GPS] is set to
“On”, but signal
cannot be
received
GPS signal cannot
be received. UTC
and positioning
information cannot
be obtained.
.
(Blink)
GPS search in
progress
UTC information
can be obtained,
but not positioning
information.
.
GPS reception
in progress
(signal strength:
weak)
Receiving weak
GPS signal. UTC
and positioning
information can be
obtained and
recorded.
.
GPS reception
in progress
(signal strength:
medium)
Receiving GPS
signal. UTC and
positioning
information can be
obtained and
recorded.
Display
Reception
Status
Positioning Status
.
GPS reception
in progress
(signal strength:
strong)
Receiving strong
GPS signal. UTC
and positioning
information can be
obtained and
recorded.
(No
display)
GPS function is
turned off
The [GPS] item is
set to “Off”.
Memo :
0
If positioning cannot be performed after waiting
for several minutes, this means GPS reception
is poor, and there is difficulty in receiving data.
Move to an open place with no obstructions.
Otherwise, GPS information will not be recorded
when shooting is performed.
0
Signal may not be received depending on
circumstances such as locations that are
indoors or surrounded by tall buildings, or the
geographical conditions.
Precision error may occur in the position
information depending on the conditions of
reception.
0
Even when positioning is in progress,
information may be disrupted depending on the
condition of signal reception.
0
When [GPS] is set to “Off”, and the SDI output is
1080/59.94p or 1080/50p, changing [GPS] to
“On” switches the SDI output to 1080/59.94i or
1080/50i.
82
Acquiring Positioning Information by GPS
Shooting