User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
System Menu
This menu screen allows system-related settings.
For specifying recording settings, formatting and
restoring of SD card, tally lamp settings, network
settings, date/time, time zone, and other settings.
It can also be used to reset the menu settings to
their default values.
Record Set...
For specifying recorded video-related settings.
(A P132 [Record Set Item] )
Media
9
Format Media
For formatting (initializing) an SD card.
(A P45 [Formatting (Initializing) SD Cards] )
9
Restore Media
Restores and updates the SD card.
(A P46 [Restoring and Updating the SD Card] )
Memo :
0
This option is not selectable in the Media mode.
0
Executing this function while [!RESTORE] is not
displayed updates the data inside the SD card.
Setup File
This allows you to save the menu settings as well
as the performance results of shutter speed and
AWB.
It is useful to save settings according to different
shooting conditions.
9
Load File...
Loads the settings.
(A P158 [Loading a Setup File] )
9
Store File...
Saves the settings.
(A P157 [Saving Setup Files] )
9
Delete File...
Deletes the configured file.
(A P159 [Deleting Setup Files] )
Tally System
For setting the display conditions of the tally lamp
(front and back) on the camera recorder.
0
Internal:
Displays mainly the status of the camera
recorder.
0
Studio:
Displays the TALLY IN/PREVIEW IN signals
from an external device, such as a remote
control unit.
[Setting Values: RInternal, Studio]
Front Tally/Back Tally
For setting how the front and back tally lamps on
this camera recoder are illuminated while recording
is in progress, when a remaining level warning is
displayed, and during live streaming.
The selectable options vary according to the [Tally
System] setting.
o When [Tally System] is set to “Internal”
0
Rec/Live Streaming:
Lights up when recording or live streaming is in
progress.
0
Live Streaming:
Lights up when live streaming is in progress.
Does not light up during recording.
0
Rec:
Lights up during recording.
0
Off:
Does not light up or blink.
[Setting Values: Rec/Live Streaming, Live
Streaming, RRec, Off]
o When [Tally System] is set to “Studio”
0
On:
Lights up when there is tally input or preview
input signal from an external device, such as a
remote control unit.
0
Off:
Does not light up.
[Setting Values: ROn, Off]
Memo :
0
The blinking warning display, such as when the
remaining battery level is low, is enabled in a
setting other than “Off”.
GPS
For setting the GPS function to On or Off (power
on/off).
[Setting Values: On, ROff]
130
System Menu
Menu Display and Detailed Settings