User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
9
SD Aspect
For setting the aspect ratio of the SD recording
image when [System] is set to “HD+SD”, “SD”, or
“SD(SDI In)”.
[Setting Values: R16:9, 4:3]
Memo :
0
When [System] is set to “HD”, “HD+Web”, or
“HD(SDI In)”, this item is fixed at “16:9”.
Rec Mode
0
For selecting the record mode for recording to
the SD card.
(A P89 [Special Recording] )
0
The selectable options vary according to the
[Record Format] menu settings.
Format
No. of Frames for
Frame & Bit Rate
Setting values
MP4
(MPEG2)
QuickTime
(MPEG2)
MXF
(MPEG2)
30p, 25p, 24p Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec,
Variable Frame
60p, 60i, 50p, 50i Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec
AVCHD 50i, 60i Normal, Pre
Rec, Interval
Rec, Frame Rec
QuickTime
(H.264)
60i (U model)
50i (E model)
Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec
60p, 60i, 50p, 50i
30p, 25p, 24p Normal, Pre
Rec, Clip
Continuous,
Interval Rec,
Frame Rec,
Variable Frame
Memo :
0
When [Slot Mode] is set to “Backup”, this item is
fixed at “Normal”.
0
[Variable Frame Rate] is enabled when
[WResolution]/[YResolution] is set to
“1920x1080” or “1280x720”, and the number of
frames for [WFrame & Bit Rate]/[YFrame & Bit
Rate] is set to 30p, 25p, or 24p.
0
When [System] is set to “HD+SD”, “HD+Web”,
“HD(SDI In)”, or “SD(SDI In)”, this item is fixed
at “Normal”.
0
When [Network] in the System menu is set to
other than “Off”, and the KA-M790G (Multicore
Remote Adapter: optional) is connected to the
rear of the camera recorder and power is
supplied from the 26-pin camera cable,
“Variable Frame” is not selectable.
9
Pre Rec Time
For setting the pre-recording time when [Rec
Mode] is set to “Pre Rec”.
[Setting Values: R5sec, 10sec]
9
Rec Frames
For setting the number of frames to record when
[Rec Mode] is set to “Frame Rec” or “Interval Rec”.
[Setting Values: R1frame, 3frames, 6frames]
9
Rec Interval
For setting the recording time interval when [Rec
Mode] is set to “Interval Rec”.
[Setting Values: R1sec, 2sec, 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min, 30min, 1hour]
9
Variable Frame Rate
For setting the frame rate during recording when
[Rec Mode] is set to “Variable Frame”.
The available options vary according to the settings
for [Record Format] B [WResolution]/
[YResolution] and [WFrame & Bit Rate]/[YFrame
& Bit Rate].
(A P93 [Variable Frame Rec] )
System Menu
135
Menu Display and Detailed Settings