User Manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Changing Metadata Server Settings
You can make direct changes to the FTP server for
importing the metadata set in [Main Menu] B
[System] B [Network]/[Settings] B [Metadata
Server], as well as the path of the file to import.
(A P140 [ Metadata Server ] )
Changing Clip Server Settings
You can make direct changes to the server and
directory settings that are specified in [Main
Menu] B [System] B [Network]/[Settings] B [Clip
Server] for uploading recorded clips in the SD card
to the FTP server.
(A P140 [ Clip Server ] )
Changing Streaming Settings
You can make direct changes to settings that are
specified in [Main Menu] B [System] B [Network]/
[Settings] B [Live Streaming Set], such as
information on the destination of distribution.
(A P137 [ Live Streaming Set ] )
Managing the Network
Connection Settings File
This camera recorder allows you to save the
network connection settings on the Wizard screen
to the camera recorder unit.
Loading a saved connecting settings file enables
you to reproduce the appropriate network
connection state speedily.
Memo :
0
To save or load the connection settings, go to
[Main Menu] B [System] B [Network]/[Settings]
B [Connection Setup].
0
The following operations can be performed on
the [Connection Setup] menu.
0
[Saving the Connection Settings File] P 197
0
[Reading the Connection Settings
File] P 198
0
[Deleting Connection Settings] P 199
Number of Storable Setup Files
Camera recorder : [CAM1] to [CAM4]
Saving the Connection Settings File
1
Select [Main Menu] B [System] B
[Network]/[Settings] B [Connection Setup]
and press the Set button (R).
2
Select [Store] and press the Set button (R).
.
2
Delete
Store
Load
Wizard
Connection Setup
3
Select the file to be newly saved (or
overwritten) using the cross-shaped
button (JK), and press the Set button (R).
.
3
<no file>
CAM4
CAM3
CAM2
CAM1
Store Connection Setup
4
Name the file.
Enter the subname using the software
keyboard.
(A P105 [Text Input with Software Keyboard] )
Memo :
0
When overwriting an existing file, the subname
of the existing file is displayed.
0
Select [Cancel] and press the Set button (R), or
press the [CANCEL] button to return to the
previous screen.
Changing the Settings via a Web Browser
197
Connecting to the Network