User Manual

Memo :
0
The selectable languages vary according to the
destination.
0
The menus and messages on the screen of the
LCD monitor or viewfinder are displayed in the
selected language.
2
Move the cursor using the cross-shaped
button (JK) to select a language to use,
followed by pressing the Set button (R).
The Initial Setting screen appears.
.
Diagnose
The Time is about 6 minutes.
with lens cap.
try self diagnosis attaching
Prior to the first operation,
3
Ensure that the lens cover is closed, and
press the Set button (R).
0
Self-diagnosis starts.
0
A progress bar appears, and “Complete
Diagnosis” appears when the diagnosis is
complete.
.
Close
Complete Diagnosis
Don't Remove Lens Cap.
Diagnosing...
Memo :
0
It takes about 6 minutes to complete the
diagnosis. During the diagnosis, do not operate
or turn off the camera recorder.
4
Press the Set button (R) after confirming
the exit screen.
The [Initial Setting] screen appears.
0
For U models
.
Set
UTC-05:00
Initial Setting
0
For E models
.
Set
UTC
Initial Setting
Memo :
0
The [Initial Setting] screen appears when the
power is turned on for the first time and when the
power is turned on after the built-in battery is fully
discharged.
0
The configured date/time data is saved in the
built-in rechargeable battery even if the power is
turned off.
5
Set the time zone and date/time.
A
Move the cursor with the cross-shaped button
(HI) and select the setting item.
B
Change the values with the cross-shaped
button (JK).
6
Press the Set button (R) after setting is
complete.
The clock is set to 0 seconds of the input date/
time.
Memo :
0
The configured date/time data can be displayed
on the LCD monitor and viewfinder and be
recorded to the SD card.
0
The value of the year can be set in the range of
“2000” to “2099”.
Changing the Time after Initial Setting
Setting the Date/Time
(A P131 [ Date/Time ] )
1
Select [System] B [Date/Time].
The [Date/Time] screen appears.
Initial Settings
35
Preparations