User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Face Detect F
Select the control to track results of face detection.
* Face Detect functions by operating the user
button assigned with the “Face Detect” function.
* When the supplied lens is not attached, “---” is
displayed and selection cannot be made.
0
AF&AE:
Sets auto focus and exposure control for the
face that is being tracked.
0
AF:
Sets auto focus for the face that is being tracked.
[Setting Values: RAF&AE, AF]
(A P56 [Adjusting the Focus by Face Detection
F] )
Memo :
0
When “AF” is selected, face detection operates
only in the Autofocus mode.
When “AF&AE” is specified, this function will be
activated only when [AUTO FOCUS/11] is set to
“ON”, or when one or more of the items (Gain,
Iris and Shutter) is set to Auto mode.
9
Sensitivity
For setting the level of ease of face detection.
[Setting Values: Low, Middle, RHigh]
9
Hysteresis
For setting the margin to maintain status when the
face that is being tracked is lost.
Set to “Fast” to select another object immediately
if the face on the screen is lost.
Set to “Slow” to operate at the same position for
some time even if the face on the screen is lost.
[Setting Values: Fast, RMiddle, Slow]
AE Lock
For setting the operation of the AE lock.
* AE lock functions by operating the user button
assigned with the “AE Lock” function.
0
AE:
Use this feature to fix a value to the Auto function
of Gain, Iris, or Shutter when the user button that
is assigned “AE Lock” is pressed.
0
AE/WB:
Use this feature to fix a value to White Balance
and the Auto function of Gain, Iris, or Shutter
when the user button that is assigned “AE
Lock” is pressed.
[Setting Values: RAE, AE/WB]
Memo :
0
This feature only works when Iris, Shutter or
Gain is set to the Auto mode.
However AE lock functions during FAW when
“AE/WB” is selected.
0
“AE Lock” is canceled when the button assigned
with “AE Lock” is pressed, or when any of the
functions that can be locked is operated
regardless of the mode (Manual or Auto).
Preset Zoom Speed F
For setting the speed to shift to the preset zoom
position that is assigned to a user button.
[Setting Values: 1 to 127 (R 64)]
Expanded Focus
For setting the operation of the expanded focus.
* Expanded focus functions by operating the user
button assigned with the “Expanded Focus”
function.
0
Toggle:
Pressing the button assigned with “Expanded
Focus” each time switches the “Expanded
Focus” function to on or off.
0
Momentary:
The “Expanded Focus” function is enabled
during the interval while the button assigned with
“Expanded Focus” is pressed.
0
Limited Time:
Activates the timer.
During autofocus, the [Expanded Focus] feature
turns off about 3 seconds after it is turned on.
During manual focus, the [Expanded Focus]
feature turns off about 3 seconds after you stop
operating the focus ring.
[Setting Values: RToggle, Momentary, Limited
Time]
112
Camera Function Menu
Menu Display and Detailed Settings