User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
9
Y Format
For selecting the format of the file to be recorded to
the SD card in slot B when [System] is set to “HD
+Web” or “HD+SD”.
The selectable options vary according to the
[System] setting.
(A P51 [Possible Slot B Setting Combinations] )
[Setting Values: RQuickTime(H.264), AVCHD]
Memo :
0
When [System] is set to “HD+SD”, this item is
fixed at “QuickTime(H.264)”.
0
When [System] is set to “HD+Web” and
[WFrame & Bit Rate] is set to “30p”, “25p”, or
“24p”, this item is fixed at “QuickTime(H.264)”.
0
When [System] is set to “HD”, “SD”, “HD(SDI
In)”, or “SD(SDI In)”, this item is fixed at the same
setting as [WFormat].
9
Y Resolution
For selecting the size of the image to be recorded
to the SD card in slot B when [System] is set to “HD
+Web” or “HD+SD”. (Horizontal x vertical)
The available options vary according to the
[System] and [YFormat] settings.
(A P51 [Possible Slot B Setting Combinations] )
[Setting Values: R960x540, 480x270]
Memo :
0
When [System] is set to “HD”, “SD”, “HD(SDI
In)”, or “SD(SDI In)”, this item is fixed at the same
setting as [WResolution].
0
When [System] is set to “HD+SD”, this item is
fixed at “720x480”.
0
When [System] is set to “HD+SD”, this item is
fixed at “720x576”.
0
When [System] is set to “HD+Web” and
[YFormat] is set to “AVCHD”, this item is fixed
at “1440x1080”.
9
Y Frame & Bit Rate
For selecting the frame rate and encoding bit rate
of the image to be recorded to the SD card in slot
B when [System] is set to “HD+Web” or “HD+SD”.
The available options vary according to the
[System] and [WFrame & Bit Rate] settings.
(A P51 [Possible Slot B Setting Combinations] )
[Setting Values: 60i (LP), 60i (EP), 50i (LP), 50i
(EP), 30p (HQ), 30p (LP), 25p (HQ), 25p (LP), 24p
(HQ), 24p (LP)]
Memo :
0
When [System] is set to “HD+SD”, this item is
fixed at “60i”.
0
When [System] is set to “HD+SD”, this item is
fixed at “50i”.
0
When [System] is set to HD+Web and
[YFormat] is set to “QuickTime(H.264)”, this
item is fixed at “30p”, “25p”, or “24p”.
0
When [System] is set to “HD”, “SD”, “HD(SDI
In)”, or “SD(SDI In)”, this item is fixed at the same
setting as [WFrame & Bit Rate].
9
Y Audio
The audio (2ch/4ch) to be recorded to slot B is the
same as the audio to be recorded to slot A.
However, if [YFormat] is set to “AVCHD”, this item
is fixed at “2ch”.
(A P51 [Possible Slot B Setting Combinations] )
[Setting Values: R4ch, 2ch]
Memo :
0
When [System] is set to “HD”, “SD”, “HD(SDI
In)”, or “SD(SDI In)”, this item is fixed at the same
setting as [WFrame & Bit Rate].
134
System Menu
Menu Display and Detailed Settings