User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
A
Operation Lock Icon
Appears when the operation lock feature is
turned on.
(A P48 [About the Operation Lock Feature] )
B
Voltage/Battery Power
Displays the current status of the power supply
in use.
(A P32 [Power Status Display] )
Memo :
0
Displayed in the Display 0 and Display 1 screens
during warnings only.
C
Remaining Space on Media
Displays the remaining recording time of the SD
cards in slot A and slot B separately.
W
: Currently selected slot. (White card)
W z : Write-protect switch of SD card is set.
W!INVALID : SD card cannot be read or
written to, or restored.
W!FORMAT : SD card requires
formatting.
W!RESTORE : SD card requires
restoring.
W
!INCORRECT
:
0
When [Rec Mode] is set to other than
“AVCHD”/“SD”/“Web” with a Class 4 SD
card inserted.
0
When the SD card is not supported.
W!REC INH :
0
When attempting to record in 50p or 50i to
an SD card recorded in [AVCHD]60p or
60i (or vice versa).
0
When attempting to record a large clip
while a media that does not support large
clip recording is inserted.
(A P136 [ 4GB File Spanning(SDXC) ] )
0
When an SD card lower than Class 10 is
inserted while in the XHQ mode.
The following icons are displayed during FTP
upload.
(A P180 [Uploading a Recorded Video Clip] )
Icon Status
.
FTP transfer is in progress.
Three images are alternately
displayed, and the arrows
become animated. In this case,
instead of the recordable time of
the SD card, an estimated value
of the remaining transfer time is
displayed.
.
(Yellow)
Error has occurred during FTP
transfer.
Memo :
0
This item is not displayed when [Main Menu] B
[LCD/VF] B [Display Settings] B [Media
Remain] is set to “Off”. However, warnings will
be displayed.
(A P123 [ Media Remain ] )
0
Displayed on the Display 0 and Display 1
screens only in the case of warnings. (When the
remaining time is shorter than 3 minutes)
The icons appear on all display screens in the
following cases.
0
When recording is performed to only one of
the slots while [System] B [Record Set] B
[Slot Mode] is set to “Dual”.
(
A P136 [ Slot Mode ] )
0
When recording is performed to only one of
the slots while [System] B [Record Set] B
[Record Format] B [System] is set to “HD
+SD” or “HD+Web”.
(A P132 [ System ] )
0
The displayed time is an estimate.
D
Frame rate C D
Frame rate/SDI IN A B
0
Displayed as xx/yy fps (xx: recording frame
rate, yy: playback frame rate) only when [Rec
Mode] is set to “Variable Frame”.
(A P135 [ Rec Mode ] )
0
“SDI IN Z” is displayed when a device is
connected to the [SDI IN] terminal, and
[System] B [Record Set] B [Record
Format] B [System] is set to “HD(SDI In)” or
“SD(SDI In)”.
(A P132 [ System ] )
146
Display Screen in Camera Mode
Display/Status Screen