User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Connecting a Earphone
0
Audio output from the [PHONES] terminal can
be selected using the [A/V Set] B [Monitor] item
or the [MONITOR] selection switch on the
camera recorder.
(A P129 [ Monitor ] )
0
The different combinations of settings that are
output from the [PHONES] terminal and monitor
speaker are as follows.
[MONITOR]
Switch
Settings
[Monitor]
Settings
[PHONES]
Terminal
Speaker *
L R
[CH-1] - CH-1 CH-1
[BOTH] [Mix] CH-1+CH-2 CH-1+CH-
2
[Stereo] CH-1 CH-2
[CH-2] - CH-2 CH-2
* Audio is output from the speaker only in Media
mode. Does not output in the Camera mode.
.
1
Connect a earphone.
2
Select the channels to monitor using the
different combinations of the left and right
[MONITOR SELECT] switches.
[MONITOR
SELECT]
Setting
Channels to
Monitor
Description
.
[CH-1] Outputs the audio
recorded in
[CH-1].
.
[CH-2] Outputs the audio
recorded in
[CH-2].
.
[CH-1]/[CH-2] Outputs the audio
recorded in
[CH-1] and
[CH-2].
.
[CH-3] Outputs the audio
recorded in
[CH-3].
.
[CH-4] Outputs the audio
recorded in
[CH-4].
.
[CH-3]/[CH-4] Outputs the audio
recorded in
[CH-3] and
[CH-4].
3
Use the [MONITOR] adjustment knob to
adjust the monitor volume.
Connecting a Earphone
163
Connecting External Devices