User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Zoom Operation
Adjusts the angle of view.
Zoom ratio: 1x to 20x (optical zoom only)
Zooming can be operated using any of the three
levers/rings below.
0
Zoom Lever at the Grip
0
Zoom Lever at the Handle F
0
Zoom Ring at the Lens Section:
Functions as a zoom ring when the [ZOOM
SERVO/MANUAL] switch is set to “MANUAL”.
.
FIX VAR OFF
W
T
REC
HOLD
Using the Zoom Lever at the Grip
1
Set the [ZOOM SERVO/MANUAL] switch to
“SERVO”.
2
Press the zoom lever to zoom.
0
The zoom speed changes according to the
extent the zoom lever is being pushed.
0
Zooms into wide angle and increases the
angle of view when “W” is pressed.
0
Zooms into telephoto and decreases the
angle of view when “T” is pressed.
0
A zoom bar appears during zoom operation
.
12 .5/ 30 f
ps
ps
P 13000K
P 13000K
1/100
1/100
F1.6
F1.6
0dB
0dB
AE+6
AE+6
ND 1/64
ND 1/64
12:34:56
12:34:56
Jan 24,2014
Jan 24,2014
00:00:00.00
00:00:00.00
5.
5.6 f t
12 .5/ 30 f
ps
ps
P 13000K
P 13000K
1/100
1/100
F1.6
F1.6
0dB
0dB
AE+6
AE+6
ND 1/64
ND 1/64
12:34:56
12:34:56
Jan 24,2014
Jan 24,2014
00:00:00.00
00:00:00.00
5.
5.6 f t
Using Zoom Ring at the Lens Section
1
Set the [ZOOM SERVO/MANUAL] switch to
“MANUAL”.
You can adjust the preferred angle of view by
turning the zoom ring.
Using the Zoom Lever at the Handle
F
The handle zoom lever operates only when the
supplied lens is in use.
1
Set the [ZOOM SERVO/MANUAL] switch to
“SERVO”.
2
Set the [FIX/VAR/OFF] zoom speed switch
to “FIX” or “VAR”.
Memo :
0
Setting to “FIX” will allow the zoom operation to
move at the speed set in [Handle Zoom Speed].
0
Set the zoom speed using [Main Menu] B
[Camera Function] B [Handle Zoom Speed].
(A P110 [ Handle Zoom Speed F ] )
0
Setting to “VAR” will change the zoom speed
according to the pressure applied on the lever.
3
Press the zoom lever at the handle to zoom.
Memo :
0
When the [FIX/VAR/OFF] zoom speed switch is
set to “OFF”, the zoom lever at the handle
section cannot be used.
Saving/Recalling Current Zoom
Position (Preset Zoom) F
The handle zoom lever operates only when the
supplied lens is in use.
This allows you to register up to three zoom
positions.
52
Zoom Operation
Shooting