INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Return Video
For setting
method of displaying return videos and
the switching operation.
* Switching of the return video display functions
by operating the user button assigned with the
“Return Video
” function.
0
Camera
G PiP:
Pressing the user button assigned with the
“Return Video” function each time toggles
between the captured video and picture-in-
picture return video.
0
Camera R PiP:
The picture-in-picture return video is displayed
when the
user button assigned with the “Return
Video” function is pressed and held down, and
the captured video is displayed when the button
is released.
0
PiP R Camera:
The captured video is displayed when the user
button assigned
with the “Return Video” function
is pressed and held down, and the picture-in-
picture return video is displayed when the button
is released.
0
PiP R Return:
The return video is displayed when the user
button assigned
with the “Return Video” function
is pressed and held down, and the picture-in-
picture return video is displayed when the button
is released.
0
Camera R Return:
The return video is displayed when the user
button assigned
with the “Return Video” function
is pressed and held down, and the captured
video is displayed when the button is released.
[Setting Values: Camera G PiP, Camera R
PiP, PiP
R Camera, PiP R Return, RCamera R Return]
Memo :
0
When [A/V Set] B [Video Set] B [Return Input]
is set to
“SDI”, this item is fixed at “Camera R
Return”.
FULL AUTO Item
Gain
0
SW Set:
In the
Full Auto mode, the gain operation follows
the setting of the [GAIN L/M/H] selection switch.
0
ALC:
In the Full Auto mode, gain is set forcibly to
“ALC” (forced auto).
[Setting Values: SW Set, RALC]
Memo :
0
If the remote control unit comes with an FAS
feature, the setting is fixed at “ALC” and
selection is disabled.
(A P166 [Functions Operable from the Remote
Control Unit] )
Iris Control
When “Off” is selected, iris control cannot be
performed in the Full Auto mode.
[Setting Values: Off, RAuto]
Memo :
0
If the remote control unit comes with an FAS
feature, the setting is fixed at “Auto” and
selection is disabled.
(
A P166 [Functions Operable from the Remote
Control Unit] )
0
When the
[IRIS A/M] mode switch on the lens is
set to “A” (Auto), the iris setting is fixed at the
point this item is changed from “Auto” to “Off”.
Shutter
0
SW Set:
In the Full Auto mode, the shutter operation
follows the setting of the switch.
0
EEI:
In the Full Auto mode, shutter is set to forced
auto.
[Setting Values: SW Set, REEI]
Memo :
0
If the remote control unit comes with an FAS
feature, the
setting is fixed at “EEI” and selection
is disabled.
(A P166 [Functions Operable from the Remote
Control Unit] )
Camera Function Menu
113
Menu Display and Detailed Settings