INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Media Remain
For setting
whether to display the remaining space
of the recording SD card.
[Setting Values: ROn, Off]
Memo :
0
When the remaining space warning is
displayed, the information appears even when
“Off” is selected.
0
The displayed time is an estimate.
TC/UB
For specifying whether to display the time code or
and user’s bit on the LCD monitor or viewfinder
screen.
Whether time code or user’s bit is displayed is
dependent on the setting of the [TC DISPLAY ]
switch inside the LCD monitor of the camera
recorder.
[Setting Values:
ROn, Off]
Histogram
For setting
whether to display the histogram, which
shows the distribution of different points with
different levels of brightness in an image.
[Setting Values: On, ROff]
Memo :
0
When the
histogram is displayed, the audio level
meter display is turned off temporarily.
9
Top
For selecting the maximum brightness limit for
changing the histogram display color.
[Setting Values: 5% to 110% (in 5% increments)]
(R 80%)
9
Bottom
For selecting the minimum brightness limit for
changing the histogram display color.
[Setting Values: 0% to 105% (in 5% increments)]
(R 20%)
Audio Meter
For setting how the audio level meter is displayed
on the LCD monitor or viewfinder screen.
0
Auto:
4ch display when [System] B [Record Set] B
[Record Format] B
[WAudio] is set to “4ch”, and
2ch display ([CH-1]/[CH-2]) in all other cases.
During playback, whether 4ch display or 2ch
display ([CH-1]/[CH-2]) is used varies with the
recorded clip.
0
CH1/2:
Displays the audio level meter for
[
CH-1] and
[CH-2].
0
Off:
Audio level meter is not displayed.
[Setting Values: RAuto, CH1/2, Off]
Memo :
0
When [Histogram] is
set to “On”, this item is fixed
at “Off” and selection is disabled.
Battery
For setting the display of the remaining battery
power in the display on the LCD monitor and
viewfinder screen.
The battery information appears only on the
Display 2 screen in Camera mode.
(A P145 [Display 2 screen] )
0
Time:
Displays the remaining battery power in
minutes. (min)
0
Capacity%:
Displays the remaining battery power in
percentage. (%)
0
Voltage:
Displays the current battery voltage in units of
0.1 V. (V)
0
Off:
The remaining battery power is not displayed.
[Setting Values:
RTime, Capacity%, Voltage, Off]
LCD/VF Menu
123
Menu Display and Detailed Settings