INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P125 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P127 [Audio Set Item] )
Video Set Item
HDMI/SDI Out
For setting the terminal to output the video.
[Setting Values: HDMI+SDI, SDI, HDMI, ROff]
Memo :
0
When the [Network] setting is set to “On(SDI
Off)”,
“HDMI+SDI” and “SDI” are not selectable.
And when “On(HDMI Off)” is set, “HDMI+SDI”
and “HDMI” are not selectable.
0
When KA-M790G (Multicore Remote Adapter:
optional)
is
connected to the rear of the camera
recorder and power is supplied from the 26-pin
camera cable, “HDMI+SDI” is not selectable.
A B
9
Resolution
For
selecting
the resolution of video output from the
[HDMI]/[SDI] terminal according to the monitor to
be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
R1080i, 1080p]
Memo :
0
The selectable options vary according to the
setting in [System]/[WResolution]/[WFrame &
Bit Rate]
of [System] B [Record Set] B [Record
Format].
0
Cross conversion output is not possible.
0
When
[GPS
] is set to “On”, and [HDMI/SDI Out]
is set to “HDMI+SDI” or “SDI”, “1080p” is not
selectable. l
9
HDMI Color
0
For setting the color format of HDMI signals.
0
This item is selectable only when
[HDMI/SDI
Out]
is set to “HDMI” or “HDMI+SDI”.
[Setting Values: RGB, RAuto]
9
HDMI Enhance
0
For setting the color range of HDMI signals.
When connecting to a PC monitor, set this to
“On”.
0
This item is selectable only when [HDMI/SDI
Out]
is set to “HDMI” or “HDMI+SDI”.
[Setting Values: On, ROff]
9
SDI Rec Trigger
For setting
whether to superimpose trigger signals
in tandem with the [HD/SD SDI OUT] terminal as
well as the [REC] button on the camera body.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
[Setting Values: On, ROff]
SD Aspect
For setting the style of displaying down-converted
images on a 4:3 aspect ratio screen.
0
Side Cut:
Displays image with the left and right sides cut
off.
0
Letter:
Displays as a wide image with the top and
bottom blackened.
0
Squeeze:
Displays image that is squeezed horizontally.
[Setting Values: Side Cut, Letter, RSqueeze]
Memo :
0
When [Record Format
] B [System] is set to “SD”
or “SD(SDI In)”, and when [SD Aspect] is set to
“4:3”, this item appears as “---” and cannot be
selected.
(A P132
[ System ] )
0
When [Record Format] B [System] is set to
“SD”, and [SD Aspect] is set to “16:9”, “Side Cut”
in [A/V Set] B [Video Set] B [SD Aspect] cannot
be selected.
(A P
125 [ SD Aspect ] )
(
A P132 [ System ] )
A/V Set Menu
125
Menu Display and Detailed Settings