INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
CH1/2 Limiter Mode
For setting whether to link the limiter operation of
[CH-1] and [CH-2].
Select “Link” to link or “Separate
” to separate.
[Setting Values: Link, RSeparate]
Memo :
0
This option
is selectable when both the [AUDIO
SELECT CH-1] and [AUDIO SELECT CH-2]
selection switches are set to “AUX”, and the
[AUDIO SELECT CH-1/CH-2 AUTO/MANUAL]
selection switch is set to “AUTO” at the same
time.
This option is selectable when the [AUDIO
SELECT CH-1] selection switch is set to
“INPUT1”, the [AUDIO SELECT CH-2] selection
switch is set to “INTPUT2”, and the [AUDIO
SELECT CH-1/CH-2 AUTO/MANUAL]
selection switch is set to “AUTO” at the same
time.
In all other cases, it is fixed at “Separate”.
CH1 Limiter/CH2 Limiter
Sets the limiter operation for [CH-1] and [CH-2]
separately.
9
Threshold Level
Sets the maximum recording level of
[
CH-1] and
[CH-2] respectively.
[Setting Values: -17dBFS, -15dBFS, -12dBFS,
-9dBFS, R -6dBFS, Off]
9
Attack Time
Sets the time to activate the limiter for
[CH-1] and
[CH-2] respectively.
[Setting Values: Fast,
RMiddle, Slow]
9
Decay Time
Sets
the
time to deactivate the limiter operation for
[CH-1] and [CH-2] respectively.
[Setting Values: Fast, RMiddle, Slow]
CH3/4 Limiter Mode
For setting whether to link the limiter operation of
[CH-3] and [CH-4].
Select “Link” to link or “Separate
” to separate.
[Setting Values: Link, RSeparate]
Memo :
0
This option
is selectable when both the [AUDIO
SELECT CH-3] and [AUDIO SELECT CH-4]
selection switches are set to “AUX”, and [Audio
Set] B [CH3/4 Input Level] B [CH3]/[CH4] is set
to “Auto” at the same time.
This option is selectable when the [AUDIO
SELECT CH-3] selection switch is set to
“INPUT1”, the [AUDIO SELECT CH-4] selection
switch is set to “INTPUT2”, and [Audio Set] B
[CH3/4 Input Level] B [CH3]/[CH4] is set to
“Auto” at the same time.
In all other cases, it is fixed at “Separate”.
(A
P71 [For CH-3/CH-4] )
CH3 Limiter/CH4 Limiter
Sets the limiter operation for [CH-3] and [CH-4]
separately.
9
Threshold Level
Sets the maximum recording level of
[CH-3] and
[CH-4
] respectively.
[Setting Values: -17dBFS, -15dBFS, -12dBFS,
-9dBFS, R -6dBFS, Off]
9
Attack Time
Sets the time to activate the limiter for
[CH-3] and
[CH-4
] respectively.
[Setting Values: Fast, RMiddle, Slow]
9
Decay Time
Sets
the
time to deactivate the limiter operation for
[CH-3] and [CH-4] respectively.
[Setting Values: Fast, RMiddle, Slow]
128
A/V Set Menu
Menu Display and Detailed Settings