INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
System Information
9
Version(Camera)
Displays information on the firmware version.
9
Version(Lens) F
Displays information on the version of the lens in
use.
9
Fan Hour
For displaying the usage time of the internal fan.
Memo :
0
Under normal environment, dust will
accumulate on
the internal fan when the camera
recorder is used over a long period. Dust may
enter the camera recorder especially if it is used
outdoors. This may affect the image and sound
quality of the camera recorder. Check and
replace the fan after every 9000 hours
(suggested guideline).
9
Open Source License
Displays the license for the open source software
used by this camera recorder.
Record Set Item
Record Format
After setting of all items in the
[Record Format
]
menu is complete, select [Set] at the bottom of the
screen to apply the new settings on the camera
recorder and switch the recording format. A
“Please Wait...” message appears during
switching.
9
System
For selecting a system definition.
Select from
“HD” (High Definition), “SD” (Standard
Definition), and “Web” (low bit rate for web use).
0
HD:
Records
the
camera video in “HD” to slot A and
slot B.
0
SD:
Records the camera video in “SD” to slot A and
slot B.
0
HD+SD:
Records the
camera video in “HD” to slot A, and
in “SD” to slot B.
0
HD+Web:
Records
the
camera video in “HD” to slot A, and
in “Web” to slot B.
0
HD(SDI In) A B:
Records the HD SDI video of the device
connected
to
the [SDI IN] terminal in “HD” to both
slot A and slot B.
0
SD(SDI In) A B:
Records the SD SDI video of the device
connected to
the [SDI IN] terminal in “SD” to both
slot A and slot B.
[Setting Values: RHD, SD, HD+SD, HD+Web,
HD(SDI In), SD(SDI In)]
Caution :
0
The selectable options for the [WFormat],
[WResolution], [WFrame & Bit Rate],
[YFormat], [YResolution], and [YFrame & Bit
Rate] settings vary depending on the setting of
this item.
0
When [System] B [System Frequency
] is set to
“50/25”, “SD
”, “HD+SD”, and “SD(SDI In)”
cannot be selected. (U model)
0
When [System] B [System Frequency] is set to
“60/30/24
”, “SD”, “HD+SD
”, and “SD(SDI In)”
cannot be selected. (E model)
132
System Menu
Menu Display and Detailed Settings