INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Slot Mode
For setting the operation of the card slot.
0
Series:
Mode that activates the two slots sequentially.
0
Dual:
Mode that activates the two slots at the same
time.
(A P85 [Dual Rec] )
0
Backup:
Mode that enables recording to slot B without
using the [REC] button. This item is selectable
only when [
Rec Mode] is set to “Normal”.
Start or stop the recording using the [Backup
Rec] menu, or by pressing the button among
[USER1] to [USER10] that is assigned with
“Backup Trig” together with the [RET] button on
the lens.
(A P
87 [Backup Rec] )
Memo :
0
When this is set to “Series”, and recordable
media are inserted in both slots, pressing the
[REC]
button starts recording only to the card in
the selected slot (active slot).
0
When “Series”
is
selected, and [Record Format]
B [WFormat] is set to “AVCHD”, the clips are
recorded over the slots seamlessly without
interruption in the video.
0
When
this
is set to “Dual”, and recordable media
are inserted in both slots, pressing the [REC]
button starts simultaneous recording to the
cards in both slots.
9
Backup Rec
For
starting/stopping
backup recording with [REC]/
[STBY].
This item is selectable only when [Slot Mode] is set
to “Backup”.
Memo :
0
When
recording
is stopped due to no remaining
space on the media, etc., this item is fixed at
“STOP” and cannot be selected.
4GB File Spanning(SDXC)
A recording
file is automatically split when the size
exceeds 4 GB, but if an SDXC card is used, you
can record clips larger than 4 GB by setting this
option to “Off”. (Up to a maximum of 64 GB or 4
hours)
0
On:
Splits a
file when it exceeds 4 GB or 30 minutes.
0
Off:
Splits a file when it exceeds 64 GB or 4 hours.
[Setting Values: ROn, Off]
Memo :
0
This option is only valid if the SD card used for
recording is of the SDXC format.
0
During simultaneous recording, such as Dual
Rec and backup recording, this option is valid
only when the SD cards in both slots are of the
SDXC format.
0
This option is valid only when [Record Format] B
[WFormat]/[YFormat] is set to
“QuickTime(MPEG2)”, “MXF(MPEG2)”, or
“QuickTime(H.264)”.
(A P
133 [ W Format ] )
(A P134 [ Y Format ] )
Recording in DCIM Folder
When “On” is selected, files are recorded to the
DCIM folder
of the SD card during MOV recording.
[Setting Values: ROn, Off]
Memo :
0
When “Off” is selected, folders containing
recorded clips may not be detectable in the MAC
OS environment.
0
To import
clips to a Blu-ray disc & HDD recorder
produced by our company, set this item to “Off”
before recording.
Time Stamp
For setting whether to display shooting date/time
information in the recorded video.
[Setting Values: On, ROff]
Memo :
0
The date/time display style can be changed in
[LCD/VF] B [Display Settings]
B [Date Style]/
[Time Style].
(A P
124 [ Date Style ] )
(
A P124 [ Time Style ] )
136
System Menu
Menu Display and Detailed Settings