INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
M
White Balance Mode
Displays the current white balance mode.
(*****K indicates color temperature)
A<*****K> : When the white balance is set to
Auto A.
B<*****K> : When the white balance is set to
Auto B.
P<*****K> : When the white balance is set to
Preset.
a
<FAW> : During Full Auto White Balance
mode.
Z
<FAW> : When [AE LOCK] is set to “On”
during Full Auto White Balance
mode.
Memo :
0
Displayed in the Display 0 screen only when
there is a change.
N
Shutter
0
The
current
shutter speed is displayed when
the shutter is set to “On”.
(A P108 [ Shutter ] )
0
a
is displayed when the [FULL AUTO] switch
is set to “ON” to enable Full Auto shooting
mode, or when the [SHUTTER] button is
pressed to enable automatic shutter mode.
Memo :
0
The variable range of the shutter speed varies
according to the video format settings.
(A P60 [Setting the Electronic Shutter] )
0
Displayed in the Display 0 screen only when
there is a change.
0
If the
shutter speed is not displayed, the shutter
is OFF.
O
Iris F-Number
Displays F-number of the lens iris.
P
Gain
0
Displays the gain value.
0
a is displayed in the ALC mode during
Manual shooting.
0
Z
is displayed when AE LOCK is set to “ON”.
0
“LUX30” or “LUX36” is displayed when in the
low-light shooting mode.
Memo :
0
Displayed in the Display 0 screen only when
there is a change.
Q
AE Level
0
Appears when the AE function is activated,
and [Main Menu
] B [Camera Function] B [AE
Level] is set to a value other than “Normal”.
(A P109
[ AE Level ] )
0
When operated while manual operation is
disabled, “AE” blinks for about 5 seconds.
0
When face detection is enabled and [Face
Detect] is set to “AF&AE”, q appears on the
left side of “AE”.
(A P
56 [Adjusting the Focus by Face
Detection
F] )
R
ND Filter Position
Displays the current ND filter position.
Memo :
0
This item is not displayed when [Main Menu
] B
[LCD/VF] B [Display Settings] B [ND Filter] is
set to “Off”.
(A
P122 [ ND Filter ] )
0
Displayed in the Display 0 screen only when
there is a change.
S
Focus Display F
0
Displays the approximate distance to the
subject in focus during manual focus.
0
e is displayed during Auto Focus.
0
When face detection is enabled, q appears
on the left side of e.
(A P56
[Adjusting the Focus by Face
Detection
F] )
(A P112 [ Face Detect F ] )
0
If [Main Menu] B [Camera Function] B [AF
Assist] is
set to “Area”, the
icon appears
on the left side of e.
(A P
110 [ AF Assist F ] )
Memo :
0
You can specify the display method (Feet/
Meter) in [
Main Menu] B [LCD/VF] B [Display
Settings] B [Focus].
This item will not be displayed when “Off” is
selected.
(A P
122 [ Focus F ] )
0
Displayed in the Display 0 screen only when
there is a change.
148
Display Screen in Camera Mode
Display/Status Screen