INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Displaying the Aspect Ratio, Aspect Marker,
Safety Zone, and Center Mark
1
Set [LCD/VF] B [Marker Settings
]
B [Grid
Marker] to “Off”.
Perform setting for each of the [Aspect Ratio],
[Aspect Marker]
, [Safety Zone
], and [Center
Mark] items.
0
Example of display when [Aspect Ratio] =
“4:3”, [Aspect Marker] = “Line+Halftone”, and
[Center Mark] = “On”
.
Aspect Marker
Center MarkSafety Zone
Memo :
0
You can turn On/Off the safety zone and center
mark displays using [LCD/VF]
B [Marker
Settings] B [Aspect Ratio], [Safety Zone], and
[Center Mark].
(A P
122 [ Safety Zone ] )
Smoothening the Skin
Color (Skin Detail
Function)
The Skin Detail function can be used to reduce the
contour enhancement of video signals for only the
skin areas so as to produce a smoother skin tone.
1
Set [Skin Detail] to “On”.
(A P
117 [ Skin Detail ] )
Set [Main Menu
] B [Camera Process] B
[Detail]/[Adjust] B [Skin Detail] to “On”.
Memo :
0
You can specify the adjustment level for the
contour enhancement of the skin tone in [Main
Menu]
B [Camera Process] B [Detail]/[Adjust]
B [Skin Detail]/[Level].
(A P
117 [ Level ] )
Color Bar Output
Color bars can be output on this camera recorder.
Memo :
0
The audio test signals (1 kHz) can be output
simultaneously with the color bar output.
(A P129 [ Test Tone ] )
To Output the Color Bar Using the Menu
To output color bars, follow the setting procedure
below.
1
Set [Camera Function] B [Bars]
to “On”.
(A P108 [ Bars ] )
Color bars are output.
To
Output the Color Bar Using the User Button
1
Assign the “Bars” function to any of the
user buttons.
(A P42
[Assignment of Functions to User
Buttons] )
2
Press
the user button that is assigned with
“Bars”
.
Color bars are output.
Marker and Safety Zone Displays
155
Camera Features