INSTRUCTIONS

Function
P: Available
-: Not
available
SHUTTER OFF, 1/100*1,
1/120*2, 1/250,
1/500, 1/1000,
1/2000, 1/4000,
1/10000
P
V.SCAN -
BLACK NORMAL,
STRETCH,
COMPRESS
P
V.RESOLUTION (HI-RESO) -
AUTO KNEE
P
- KNEE POINT
P
GAMMA
P
- LEVEL
P
DNR
P
- LEVEL -
COLOR MATRIX -
SMOOTH TRANS
P
MASTER BLACK
P
ASPECT
RATIO
4:3, 16:9, LETTER -
H.PHASE
P
HD H.PHASE
P
SC COARSE 0°, 90°, 180°, 270° -
CALL*4
P
TALLY(PROGRAM)*4
P
TALLY(PREVIEW)*4
P
*1 Only
when the frame rate of the [W
Frame & Bit
Rate] and [YFrame & Bit Rate] items in the
[Record Format] menu of the camera recorder
is set to “60”, “30”, or “24”.
*2 Only when the frame rate of the [WFrame & Bit
Rate] and [YFrame & Bit Rate] items in the
[Record Format] menu of the camera recorder
is set to “50” or “25”.
*3 “Normal” when both [Stretch] and [Compress]
are set to “Off”.
*4 Available only when [System] B [Tally
System] is set to “Studio” during startup.
Inputting SDI Signals from
an External Device A
B
The camera recorder comes equipped with a
[SDI
IN] terminal on the side, which enables HD/SD SDI
signals from an external device to be recorded to
the SD card.
.
HD/SD SDI IN
1
Set the camera recorder to the Camera
mode.
(A P
18 [Operation Modes] )
2
Set [System]
to “HD(SDI In)” or “SD(SDI
In)”.
Set [Main Menu] B [System] B [Record Set]
B
[Record Format] B [System] to “HD(SDI In)” or
“SD(SDI In)”.
3
Input SDI signals from the external device
to the [
SDI IN
] terminal.
4
Set the [Record Format] item.
Set each item according to the selected
[System] item.
(A P132 [ Record Format ] )
SDI Input Signal
W Resolution
1080/59.94i
1080/50i
1920×1080
1440×1080
720/59.94p
720/50p
1280×720
480/59.94i 720×480 (U model)
576/50i 720×576 (E model)
Memo :
0
When a
signal with a recording format other than
those stated in the table is input, “Invarid Sync”
will be displayed.
168
Functions Operable from the Remote Control Unit
Connecting External Devices