INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Deleting Connection Settings
1
Select [Main Menu] B [System]
B
[Network]/[Settings] B [Connection Setup]
and press the Set button (R).
2
Select [Delete] and press the Set button
(R).
.
2
Back
Delete
Store
Load
Wizard
Connection Setup
3
Select the file to delete using the cross-
shaped button (JK), and press the Set
button (R).
.
3
CAM3
CAM2
CAM1
Delete Connection Setup
4
Select [Delete] on the confirmation screen,
and press the Set button (R).
Deletion starts, and “Deleting...” appears
on the
screen.
.
:TOKYO
4
Cancel
Delete
CAM1
Setup?
Delete Connection
5
Deletion is complete.
After file deletion is complete, “Complete”
appears on the screen.
Performing Live
Streaming
By combining with a decoder device or PC
application that support live streaming, you can
perform audio
and video streaming via the network.
Supported Formats
Video
H.264
0
1920x1080/60i (8.0M), 60i (5.0M), 60i (2.5M),
50i (8.0M), 50i (5.0M), 50i (2.5M)
0
1280x720/30p (5.0M), 30p (3.0M), 30p (1.5M),
25p (5.0M), 25p (3.0M), 25p (1.5M)
0
720x480/60i (5.0M), 60i (3.0M), 60i (1.5M), 60i
(0.8M), 60i (0.3M), 60i (0.2M)
0
720x576/50i (5.0M), 50i (3.0M), 50i (1.5M), 50i
(0.8M), 50i (0.3M), 50i (0.2M)
0
480x270/30p (0.2M), 25p (0.2M)
Memo :
0
The following constraints apply depending on
the setting of [Main Menu] B [System] B
[Network]/[Settings]
B [Live Streaming Set] B
[Type].
0
An encoding bit rate exceeding 5.0 Mbps
cannot be selected in the case of “RTSP/
RTP”.
0
An encoding bit rate exceeding 3.0 Mbps
cannot be selected in the case of
“ZIXI”.
(
A P139 [ Type ] )
Audio
AAC
Supported Protocols
Network protocols : TCP, UDP
Transport mode :
MPEG2-TS,
RTSP/RTP, ZIXI
Managing the Network Connection Settings File
199
Connecting to the Network