INSTRUCTIONS

Table Of Contents
Lens Section A C
.
REC
MNLKJI
E
CAB
FGH
D
A
Filter Built-In Screw
0
Transparent or
UV filter for lens protection, or
filters for various effects can be installed.
0
Installable filter types: Φ72mmP0.75
Memo :
0
Remove the
lens hood when installing the filter.
(A P29 [Attaching/Detaching the Hood A
C] )
B
Lens Cover Open/Close Switch
(A P29 [Opening/Closing the Lens Cover
A
C] )
C
Focus Ring
(A P53 [Focus Operation F] )
D
Zoom Ring
(A P52 [Zoom Operation] )
To operate zoom with this ring, set the [ZOOM
SERVO/MANUAL] switch H to “MANUAL”.
E
Iris Ring
(A P58 [Adjusting the Iris] )
To operate the auto iris, set the [IRIS A/M] mode
switch M to “A”.
F
Zoom Servo Connector
This is
a connector for connecting a zoom servo
unit (sold separately). When using a separately
sold zoom servo unit, set the [ZOOM SERVO/
MANUAL] switch H to “SERVO”.
G
[F.f] Back Focus Button and Indicator Lamp
(A P41 [Adjusting Back Focus] )
H
[ZOOM SERVO/MANUAL] Zoom Operation
Servo/Manual Switch
Set to “SERVO” in the following cases.
0
When using the grip zoom lever L on the
lens,
or
the handle zoom lever c on this unit
0
When using a zoom servo unit (sold
separately)
0
When operating remotely from a remote
control unit connected to the [REMOTE1]/
[REMOTE2] terminal or from a web browser
(A P52
[Zoom Operation] )
I
Lens Cable
For connecting to the camera’s
[LENS]
connection terminal.
J
[REC] Record Trigger Button
Starts/stops recording.
K
[RET] Return Video Button
Functions as a push autofocus button. F
(A P54 [Setting to Auto Focus Temporarily
(Push Auto Focus)] )
You can also use it as a user button by assigning
a specific feature in the menu setting to this
button.
(A P42 [Assignment of Functions to User
Buttons] )
L
Zoom Lever at the Grip
To operate zoom servo with the zoom lever at
the grip, set the [ZOOM SERVO/MANUAL]
switch 8 to “SERVO”.
(A P52 [Using the Zoom Lever at the Grip] )
M
[IRIS A/M] Iris Mode Switch
Switches the mode of the iris ring 5. Select “A”
to set to auto iris, and “M” to set to manual iris.
N
[IRIS] Iris Momentary Button
When the [IRIS A/M] mode switch M is set to
“M”, Auto Iris mode is enabled while the button
is pressed down.
26
Names of Parts
Introduction