INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Safety Precautions
.
1.
2.
IMPORTANT SAFEGUARDS
4.
Unplug this appliance system from the
wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
5.
Do not use attachments not
recommended by the appliance
manufacturer as they may cause
hazards.
6.
Do not use this appliance near water -
for example, near a bathtub,
washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming
pool, etc.
Read all of these instructions.
Save these instructions for later use.
7.
3.
All warnings on the product and in the
operating instructions should be
adhered to.
Do not place this
appliance on an
unstable cart, stand,
or table. The
appliance may fall,
causing serious injury
to a child or adult, and serious
damage to the appliance. Use only
with a cart or stand recommended by
the manufacturer, or sold with the
appliance. Wall or shelf mounting
should follow the manufacturer’s
instructions, and should use a
mounting kit approved by the
manufacturer. An appliance and cart
combination should be moved with
care. Quick stops, excessive force,
and uneven surfaces may cause the
appliance and cart combination to
overturn.
.
8.
Slots and openings in the cabinet and
the back or bottom are provided for
ventilation, and to insure reliable
operation of the appliance and to
protect it from overheating, these
openings must not be blocked or
covered. The openings should never
be blocked by placing the appliance
on a bed, sofa, rug, or other similar
surface. This appliance should never
be placed near or over a radiator or
heat register. This appliance should
not be placed in a built-in installation
such as a bookcase unless proper
ventilation is provided.
9.
This appliance should be operated
only from the type of power source
indicated on the marking label. If you
are not sure of the type of power
supplied to your home, consult your
dealer or local power company. For
appliance designed to operate from
battery power, refer to the operating
instructions.
10.
For added protection for this product
during a lightning storm, or when it is
left unattended and unused for long
periods of time, unplug it from the wall
outlet and disconnect the antenna or
cable system. This will prevent
damage to the product due to lightning
and power-line surges.
11.
Do not allow anything to rest on the
power cord. Do not locate this
appliance where the cord will be
abused by persons walking on it.
12.
Follow all warnings and instructions
marked on the appliance.
13.
Do not overload wall outlets and
extension cords as this can result in
fire or electric shock.
14.
Never push objects of any kind into
this appliance through cabinet slots as
they may touch dangerous voltage
points or short out parts that could
result in a fire or electric shock. Never
spill liquid of any kind on the appliance.
Safety Precautions
3
Introduction