INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Warnings by Lamp and Warning Tone
Warning status is indicated by tally lamp and
warning tone.
0
The front and back tally lamps of the camera
recorder appear blinking.
0
The warning tone is output from the monitor
speaker or [PHONES] terminal.
Memo :
0
If you
continue to use the camera recorder while
the power warning is displayed, the camera
recorder will stop automatically when the battery
or supplied voltage from the DC power becomes
lower.
Caution :
0
The remaining battery power and time are
displayed as they are from the battery
information. Accurate
data may not be displayed
depending on the battery condition. Replace the
battery as soon as possible when the remaining
battery power and time are low.
Turning On/Off the Power
Turning On the Power
1
Set the [POWER ON/OFF] switch to “ON”.
0
The camera recorder starts up in Camera
mode and is ready for shooting.
0
The power
status indicator lights up in green.
.
Memo :
0
The camera
recorder always start up in Camera
mode when the [POWER ON/OFF] switch is set
to “ON”.
0
Pressing the [CAM/MEDIA] selection button on
the camera recorder each time switches the
mode.
0
Setting [System] B [Record
Format
] B [System]
to “HD(SDI In)” or “SD(SDI In)” switches the
camera recorder to the SDI Input mode.
A B
(A P18
[Operation Modes] )
Camera Mode
Camera images are output on the viewfinder and
LCD monitor. If a recordable SD card is inserted,
the camera recorder switches to the recording
standby mode, and “STBY” is displayed on the
operation mode display area of the LCD monitor
and viewfinder.
Press the [REC] trigger button to start recording.
Memo :
0
Playback of SD card is not possible in the
Camera mode. However, you can check the
most recently recorded video clip using the clip
review feature.
(A P83 [Viewing Recorded Videos
Immediately (Clip Review)] )
Media Mode
This mode allows you to play back or delete clips
recorded on the SD card.
When a
playable SD card is inserted, the thumbnail
or playback screen is displayed on the viewfinder
and LCD monitor.
USB Mode
0
This mode allows you to connect to a PC and
transfer the files on an SD card to the PC.
(Writing is not allowed)
0
When the camera recorder is connected to a
USB cable, the message “Change to USB
Mode?” appears.
Select [Change] and press the Set button to
switch to USB mode.
0
In USB mode, the camera recorder is
recognized
by
the connected PC as a peripheral
drive. (USB mass storage class only)
Disable the connection on the PC and remove
the USB cable from the camera recorder to
switch to Camera mode.
(A P160 [Managing/Editing Clips on a PC] )
Power Status Display
33
Preparations