INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Remote Edit Mode
0
This mode
enables the list display and editing of
the recorded clip data through access to the clip
list display page via a web browser on a
smartphone, tablet terminal, or PC.
0
When you access via a web browser on a
smartphone, tablet terminal, or PC, “It is
necessary to change the camera mode to
"Remote Edit Mode". Change the mode.”
appears on the web browser. Also, “Change to
Remote
Edit Mode?” is displayed on the display
screen of the camera unit.
Selecting [Change] on the camera recorder and
pressing the Set button switches to the Remote
Edit mode, and enables display of the clip list
and editing of the clip metadata.
(A P
184 [ Clip Metadata ] )
(
A P187 [Uploading a Recording Clip via a Web
Browser] )
Turning Off the Power
Sets the camera recorder to the recording standby
or stop mode.
1
Set the [POWER ON/OFF] switch to “OFF”.
2
Remove the battery and the power to the
[DC INPUT]
terminal (when not in use for a
long time).
Memo :
0
The
[POWER ON/OFF
] indicator lamp lights up
in green when the camera recorder is shutting
down, and turns off when shutdown is complete.
Caution :
0
Do not set the [POWER ON/OFF] switch to
“OFF
” during recording. Check that the
operation mode display is “STBY” or “STOP”
before you turn off the power.
0
If you have mistakenly set the
[
POWER ON/
OFF] switch to “OFF” during recording, wait for
5 seconds or more before you turn on the power
again.
0
When turning off the power, first set the
[POWER ON/OFF
] switch of the camera
recorder
to “OFF”. Do not remove the battery or
turn off the power of the AC adapter while the
[POWER ON/OFF] switch is set to “ON”.
Initial Settings
When the
power is first turned on, the Initial Setting
screen for performing the initial settings in the
camera recorder appears.
Set the date/time of the built-in clock in the [Initial
Setting] screen.
All operations are disabled until initial settings are
complete.
.
Memo :
0
It
is
recommended to use the AC adapter as the
power supply.
0
Be sure to close the lens cover.
1
Set the [POWER ON/OFF] switch to “ON”.
A language selection screen appears.
0
For U models
.
Español
Français
English
Language
0
For E models
.
Pусский
Español
Italiano
Deutsch
Français
English
Language
34
Turning On/Off the Power
Preparations