INSTRUCTIONS

Adjusting the Viewfinder
You can change the brightness and peaking of the
viewfinder screen according to your usage conditions.
Changing the brightness of the screen will not affect the
recorded images.
.
2
1
3
Caution :
0
A high-definition viewfinder is used on this
camera recorder
in order to provide an accurate
focusing environment. Due to the characteristic
of the display device, colors may appear on the
images when you blink your eyes. This is not a
malfunction. It does not affect the recorded
images, SDI output, VIDEO output, or HDMI
output.
1
Loosen the two rings, and adjust the
position
and
angle of the viewfinder to one
that eases viewing.
2
Turn the visibility adjustment lever to
adjust the visibility.
Turn the visibility adjustment lever to sharpen
the image on the viewfinder screen.
3
Adjust the brightness, contour, and
contrast of the viewfinder screen.
Adjusting the Brightness
Use the [VF
BRIGHT
] adjustment knob to adjust
the brightness of the viewfinder screen.
Adjusting the Contour
Use the [VF PEAKING] adjustment knob to
adjust the outline of the viewfinder screen.
Memo :
0
When [Main Menu
] B [LCD/VF] B [LCD + VF] is
set to “Off”, operate after switching to the
viewfinder display by pressing the [DISPLAY]
button for 2 seconds or longer.
0
During Focus Assist operation, the contour
correction effect on the viewfinder will be
temporarily disabled.
Adjusting the Contrast
Use the [VF Contrast] menu to adjust the
contrast of the viewfinder screen.
0
Adjust using
[Main Menu] B [LCD/VF] B [VF
Contrast].
0
Increasing the value increases the contrast.
[Setting
Values:
+10 to -10] (Default value: 0)
Displaying in Black and White
You can display the viewfinder screen in black
and white.
0
[Main Menu]
B [LCD/VF] B [VF Color] item B
Press Set button (R) B Select “Off” B Press
Set button (R).
(A P
120 [ VF Color ] )
Adjusting the Monitor
Speaker
The monitor speaker can be rotated 180 degrees.
Adjust according to the position of your ear.
.
Memo :
0
Adjust the volume level of the monitor speaker
using the
[MONITOR] level adjustment knob on
the operation panel located at the right side of
the camera recorder. Various warning alarm
tones may also be output repeatedly.
(A P206 [Warning Tone] )
Caution :
0
The rotation
angle of the monitor speaker is 180
degrees. Do not over-rotate the monitor
speaker.
40
Adjusting the LCD Monitor and Viewfinder
Preparations