INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Assignment of Functions
to User Buttons
You can assign functions to the following buttons
and use them as user buttons.
By assigning
functions to the buttons, the usability
of the camera recorder can be enhanced.
Perform settings in the menu items corresponding
to each button.
Button Menu Item
[OIS/1] Button [USER1]
[MARKER/2] Button [USER2]
[LOAD FILE/3] Button [USER3]
[F.ASSIST/4] Button [USER4]
[J/5] Button [USER5]
[K/6] Button [USER6]
[7/H/ZEBRA] Button [USER7]
[8/I/SPOT METER] Button [USER8]
[AWB/9] Button [USER9]
[REC/10] Button [USER10]
[AUTO FOCUS/11] Button [USER11]
[RET] Button [Lens RET]
.
1
Assign functions to the buttons from the
menu.
Set items in [Main Menu] B [Camera Function]
B [User Switch Set] B [
USER1] to [USER11],
and [Lens RET].
(
A P111 [User Switch Set Item] )
Memo :
0
Operations of the user buttons are interlocked
with the menu settings.
0
When the menu screen is displayed, these
buttons function
as the menu operation buttons.
(A P103 [Basic Operations in Menu Screen] )
Tally Lamp
This is the indicator lamp for recording and
warning.
The operation changes according to the menu
settings.
The lamp blinks when the battery or remaining
space on the SD card is low. (Camera mode only)
* Set using [Main Menu] B [System] B [Front
Tally
]
/[Back Tally].
(A P130 [Front Tally/Back Tally] )
.
0
When [Tally System] is set to
“Internal”
Menu Setting
Front Tally/Back Tally
Off Rec Live
Streaming
Rec/Live
Streaming
Information on
Camera
Recorder
Functions
Warning -
J J J
Alarm -
o o o
Camera
Recorder
Recording
Status
Recording -
R
-
R
Special
Recording in
Progress *1
R
-
R
Live Streaming
Status
Live
Streaming in
Progress
- -
R R
0
When [Tally System] is set to
“Studio”
Menu Setting
Front Tally/Back Tally
Off On
Information on
Camera Recorder
Functions
Warning -
J
Alarm -
o
Input from Remote
Control Unit
CALL -
o
*2
PROGRAM -
R
PREVIEW -
R
R
: Lights up
o
:
Blinks once in 1 second
J
: Blinks twice in 1 second
*1 Paused state during special recording ([Clip
Continuous]).
(
A P89 [Clip Continuous Rec] )
*2 Back tally only
Memo :
0
Blinking takes priority over lighting up.
42
Assignment of Functions to User Buttons
Preparations