INSTRUCTIONS

About the Operation Lock
Feature
You can use this feature to prevent erroneous
camera operation.
.
1
While in the Camera mode (when the
display screen appears), press and hold
the [CANCEL] button for 5 seconds or
longer.
0
The operation lock turns on, and an operation
lock icon (r) appears on the display
screen.
.
P13000K
1/100
F1.6
0
dB
AE+6
ND 1 /64
12 :34 : 56
Jan 24,2012
00:00:00.00
5 . 6 f t
0
Press the [CANCEL] button again for 5
seconds or longer to turn off the operation
lock.
Memo :
0
The operation lock feature is only valid in the
Camera mode.
(A P18
[Operation Modes] )
0
The power turns off and the operation lock is
disengaged.
0
The following remote operations are possible
even when the operation lock feature is turned
on.
0
Operation from the wired remote control
connected to
the [REMOTE2] terminal or the
remote control unit connected to the
[REMOTE1] terminal.
0
Remote operation of the camera through
access
via
a web browser on devices such as
a smartphone, tablet terminal, or PC.
Operation lock does not apply to the following
buttons and switches.
0
[POWER ON/OFF]
switch
0
[ND FILTER
] switch
0
[AUDIO SELECT CH-1~CH-4] input selection
switch
0
[AUDIO INPUT] selection switch 1/2
0
All switches inside the LCD monitor door
0
All switches on the lens
([
REC]
button, [RET] button, back focus button,
[IRIS A/M] switch, [IRIS] button, grip zoom lever,
[ZOOM SERVO/MANUAL] switch, zoom ring,
iris ring, focus ring)
0
[
MONITOR] adjustment knob
0
Grip zoom lever/handle zoom lever
0
[ZOOM SERVO/MANUAL] switch
0
[FIX/VAR/OFF] zoom speed switch
0
[REC/10
] button (side operation panel)
0
[AWB/9] button (lens bottom)
0
[REC] button (handle top)
Memo :
0
Operation lock
is not applied only when “Rec” is
assigned to the [AWB/9] button at the bottom of
the lens or the [REC/10] button on the side
operation panel in the [Camera Function] B
[User Switch Set] menu.
48
About the Operation Lock Feature
Preparations