INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Basic Shooting
Procedures
Preparations
.
1
5
2
3
4
1
Attach the necessary accessories.
(A P28 [Settings and Adjustments Before
Use] )
2
Supply battery or AC adapter power to the
camera recorder.
(
A P30 [Power Supply] )
3
Insert an SD card.
(
A P43 [SD Card] )
4
Turn on the power of the camera recorder.
Setting the [POWER ON/OFF] switch to “ON”
starts up the camera recorder in the Camera
mode to enable shooting.
5
Adjust the angle of the LCD monitor and
viewfinder.
(A P38 [Adjusting the LCD Monitor and
Viewfinder] )
Shooting
1
Configure the video and audio input
settings.
You have to configure video settings such as
brightness adjustment (iris, gain, shutter) and
white balance adjustment in order to start
shooting. You also have to adjust the audio
input settings and audio recording level for
audio recording.
0
Adjusting the Brightness
(A P57 [Adjusting the Brightness] )
0
Adjusting the White Balance
(
A P63 [Adjusting the White Balance] )
0
Adjusting Audio Input Settings and
Recording Level
(A P69 [Audio Recording] )
2
Press the [REC] button
to start recording to
the SD card.
This camera recorder has three [REC]
buttons.
Any of the [REC] buttons can be used to start/
stop recording by default.
The front and back tally lamps light up in red
during recording.
0
Zoom Operation
(A P
52 [Zoom Operation] )
0
Adjusting the Focus Manually
(
A P53 [Focus Operation F
] )
Memo :
0
If both
the slots are loaded with recordable cards
in the factory default, pressing the [REC] button
starts recording only to the media in the selected
slot.
When [Main Menu] B [System] B [Record Set]
B [Slot Mode] is set to “Dual”, recording can be
performed simultaneously to the cards in both
the slots.
(A P85
[Dual Rec] )
0
The tally lamps can be turned off in the [System]
B [Front Tally]/[Back Tally] menu.
(A P
130 [Front Tally/Back Tally] )
3
Check the most recently captured images.
0
Press the
user button assigned with the [Clip
Review] function to activate the Clip Review
function. The most recently captured images
are played back on the LCD monitor and
viewfinder screen.
0
After playback, the camera recorder returns
to standby mode (STBY).
(A P
83 [Viewing Recorded Videos
Immediately (Clip Review)] )
Basic Shooting Procedures
49
Shooting