INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
1
Assign the “Preset Zoom1”, “Preset
Zoom2”
, or “Preset Zoom3” function to any
of the user buttons.
* This excludes the [AUTO FOCUS/11] button.
(A P42 [Assignment of Functions to User
Buttons] )
(
A P111 [USER1 to USER11, Lens RET] )
2
Save the current zoom position.
0
Press any of the buttons assigned with the
“Preset Zoom1”, “Preset Zoom2
”, or “Preset
Zoom3” function for more than 1 second.
0
The current zoom position will be stored.
3
Recall the stored zoom position.
0
Press any of the buttons assigned with the
“Preset Zoom1”, “Preset Zoom2
”, or “Preset
Zoom3” function and release within 1
second.
0
The camera recorder zooms to the stored
zoom position.
Memo :
0
To recall the stored zoom position, set the
[ZOOM SERVO/MANUAL] switch to “SERVO
”.
0
The speed
to zoom to the zoom position can be
set with [Main Menu] B [Camera Function] B
[Preset Zoom Speed].
(A P112
[ Preset Zoom Speed F
] )
0
Operating other zoom maneuvers during a
zoom position recall will cancel the recall.
Focus Operation F
Adjusting Focus Manually
.
1
Set the [AUTO FOCUS/11] switch to “OFF”.
The manual focus icon d appears on the
screen.
The handle
zoom lever operates only when the
supplied lens is in use.
.
P13000K
1/100
F1. 6
0
dB
AE+6
ND 1 /64
12 :34 :56
Jan 24 ,2014
00: 00:00.00
5 . 6 f t
Memo :
0
If [Main Menu
] B [LCD/VF] B [Display Settings]
B [Focus] is set to “Off”, the d icon will not
appear.
(A P
122 [ Focus F ] )
2
Turn the focus ring to adjust the focus.
Memo :
0
Using the Focus Assist or Expanded Focus
function makes it easier to focus.
(A P55 [Focus Assist Function] )
(
A P55 [Expanded Focus Function] )
0
Even while in the Manual Focus mode, pressing
the [RET] button on the lens or the user button
assigned with the “One Push Focus” function
switches the camera recorder to the One-push
Autofocus mode.
Zoom Operation
53
Shooting