INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Monitor Speaker
- Adjusting Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- SD Card
- About the Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting a Recording Format
- Zoom Operation
- Focus Operation
- Adjusting the Focus by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Using the Histogram
- Recording Simultaneously at Two Different Definitions
- Splitting the Clips Freely (Clip Cutter Trig)
- Dual Rec
- Backup Rec
- Special Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Managing/Editing Clips on a PC
- Connecting External Monitor
- Connecting a Earphone
- Connecting Wired Remote Control
- Connecting a Remote Control Unit
- Functions Operable from the Remote Control Unit
- Inputting SDI Signals from an External Device
- Inputting External Synchronizing Signals (Genlock)
- Displaying Return Videos from an External Device
- Studio System
- Connecting to the Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Others
Adjusting the Iris
You can
adjust the aperture of the lens iris manually
or automatically according to the brightness of the
object.
.
Manual Iris (Manual Adjustment) Mode
The aperture value (F-number) of the lens can be
set manually.
1
Set the [IRIS
A/M]
mode selection switch on
the lens to “M”.
The camera recorder switches to the Manual
Iris mode, and the a icon on the screen
disappears.
2
Turn the iris ring on the lens to adjust the
iris manually.
The open F-number of the supplied lens varies with
the zoom position. F
Wide [W] end
:
F1.6
Tele [T] end : F3.0
F-number Description
Decrease The subject appears brighter.
The focused range becomes
sharper, while the background is
blurred to produce a soft image.
Increase The subject appears darker.
Background of image becomes
focused as well.
Memo :
0
Even while
in the Manual Focus mode, pressing
the [IRIS] button on the lens or the user button
assigned with the [One Push Iris] function
switches the camera recorder to the One-push
Auto Iris mode.
0
Even
while
in the Manual Focus mode, pressing
and holding the [IRIS] button on the lens or the
user button assigned with the [One Push Iris]
function switches the camera recorder to the
Push Auto Iris mode.
Auto Iris (Automatic Adjustment) Mode
The iris is automatically adjusted according to the
brightness of the object.
1
Set the [IRIS
A/M]
mode selection switch on
the lens to “A”.
The camera recorder switches to the Auto Iris
mode, and the a icon appears on the screen.
.
P13000K
1/100
F1. 6
0
dB
AE+6
ND 1/64
12 :34 :56
Jan 24 ,2014
00: 00:00.00
5 . 6 f t
Memo :
0
Set the [
FULL AUTO] switch on the camera
recorder to “ON” to enter Auto Iris mode
(automatic adjustment mode). The iris is
automatically adjusted according to the
brightness of the object.
In this case, operation of the [IRIS A/M] mode
selection switch and [IRIS] button on the lens is
disabled.
0
The iris open/close limit can be set in
[Main
Menu]
B [Camera Function] B [Auto Iris Limit
(OPEN)]/[Auto Iris Limit (CLOSE)] during Auto
Iris.
(A P109
[ Auto Iris Limit (OPEN) ] )
(A P109 [ Auto Iris Limit (CLOSE) ] )
0
You can use the cross-shaped button (HI) on
the side control panel to set the target level
(brighter/darker) of the auto iris.
(A P109 [ AE Level ] )
0
The convergence speed of the auto iris can be
set in the menu.
(
A P109 [ AE Speed ] )
58
Adjusting the Iris
Shooting