INSTRUCTIONS

FAW Paint Adjustment
You can fine-adjust the white balance that was
automatically adjusted.
1
Select [Main Menu] B [
Camera Process
] B
[White Balance] B [FAW Paint] and press
the Set button (R).
The FAW Paint Adjustment screen appears.
.
1
FAW Paint
White Balance
2
Adjust the R and B values.
Use the cross-shaped button (JK) to adjust R
value and (HI) to adjust B value.
.
B
R
3
Press the Set button (R).
Returns to the [White Balance] screen.
.
B Value
R Value
FAW Paint
White Balance
White Shading Adjustment
0
Adjustment of white shading is needed when
you have changed the lens.
0
Although white balance may be appropriate at
the center
of the image, this may not be the case
at the top and bottom areas.
If this is the case, the image will appear greenish
or yellowish. This phenomenon is due to the
characteristics of the lens. The process of
correcting this phenomenon is referred to as
white shading adjustment.
0
Perform this process after adjusting the white
balance.
.
Setup Prior Adjustment
1
Obtain the white balance on the camera.
(A
P64 [Memory A Mode (A), Memory B Mode
(B)] )
2
Set the control of the camera lens as
follows.
A
Set the iris to F4.0 or narrower to obtain
the appropriate brightness.
If the brightness is insufficient at F4.0,
obtain the appropriate brightness such
as by adjusting the lighting.
B
When using a zoom lens, set to the
center of the zoom adjustment range.
3
Fill
the monitor screen with a pattern box of
a uniform light source, or a piece of white
(plain) paper that is uniformly illuminated.
4
Set the chroma level of the monitor to the
maximum.
5
Check the monitor screen.
0
There
is
no need for adjustment if there is no
color at the top and bottom of the screen.
0
If the top of the screen is greenish and the
bottom is reddish or vice versa, continue this
adjustment.
66
Adjusting the White Balance
Shooting