INSTRUCTIONS

Table Of Contents
2
Select the framing mode for the time code
generator (only
when the frame rate setting
is “60” or “30”).
Set using [Main Menu] B [TC/UB] B [Drop
Frame].
(A P
119 [ Drop Frame ] )
0
[Drop]:
Sets the
run mode of the time code generator
to drop frame mode. Use this setting when
placing emphasis on the recording time.
0
[Non Drop]:
Sets
the run mode of the time code generator
to non-drop frame mode. Use this setting
when placing emphasis on the number of
frames.
Memo :
Drop frame/non-drop frame mode
0
When the frame rate setting in [Main Menu]
B
[System] B [Record Set] B [Record Format] B
[Frame & Bit Rate] is “60p”, “60i”, or “30p”, the
actual number of frames per second is
approximately 59.94 (29.97). However, the time
code processing standard is “60p”, “60i”, or
“30p” frames. To make up for the frame number
discrepancy, the drop frame mode (Drop) drops
the 00 frame and 01 frame every minute except
for minutes that are multiples of 10. However, in
the case of “60p”, the 00, 01, 02 and 03 frame
are dropped.
0
The
non-drop
frame mode (Non Drop) does not
drop frames and ignores the discrepancy with
the actual time.
Presetting the Time Code
.
1
Select [Main Menu]
B [TC/UB] B [TC Preset]
and press the Set button (R).
(A P119 [ TC Preset ] )
The [TC Preset
] screen appears.
.
1
TC Preset
TC/UB
Memo :
0
When the
[TC GENE.] switch is set to “REGEN”,
the parameter is displayed as “Regen” and
selection is disabled.
2
Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (HI) to place the
cursor at the item to set, then use the cross-
shaped button (JK) to change the values.
.
TC Preset
TC/UB
During drop frame
During
non-drop frame
Cursor
Memo :
0
Press the [MARKER/2] button to reset each digit to
“0”. The cursor moves to the time digit (left).
3
Check the values and press the Set button
(R).
0
The time code is set and the screen returns
to [TC/UB].
0
To cancel the setting, press the [CANCEL]
button.
4
Press the [MENU/THUMB] button.
Returns to the normal screen.
74
Setting Time Code Generator
Shooting