INSTRUCTIONS

Setting the User’s Bit
You can add the date, time or an 8-digit
hexadecimal number as the user’s bit to the
recorded image.
.
Selecting a Recording Mode
Recording date/time information to the user’s
bit
1
Set [Main Menu] B [TC/UB
] B [UB Mode] to
“Date” or “Time”, and press the Set button
(R).
(A P
119 [ UB Mode ] )
The date or time information is recorded to the
user’s bit.
Memo :
0
When “Date” or “Time
” is set, [Preset] appears
as “-” and cannot be set.
0
“Time
” is displayed in the 24-hour format.
Presetting the User’s Bit
Recording arbitrary information (8-digit
hexadecimal) to the user’s bit
1
Set [Main Menu] B [TC/UB
] B [UB Mode] to
“SW Set”, and press the Set button (R).
(A P
119 [ UB Mode ] )
2
Move the cursor to
[Preset] and press the
Set button (R).
The [UB Preset] setting screen appears.
.
2
Preset
UB Mode
TC/UB
Memo :
0
When
the
[TC GENE.] switch is set to “REGEN”,
“Regen” is displayed and preset is disabled.
3
Use the cross-shaped button (HI)
to
place
the cursor at the item to set, then use the
cross-shaped button (JK) to change the
values.
Numbers between 0 and 9 or alphabets
between A and F can be specified for the user’s
bit.
.
TC/UB
Cursor
Memo :
0
Press the [MARKER/2] button to reset each digit to
“0”. The cursor moves to the left.
4
Check the values and press the Set button
(R).
0
The user’s
bit is set and the screen returns to
[TC/UB].
0
To cancel the setting, press the [
CANCEL]
button.
5
Press the [MENU/THUMB] button.
Returns to the normal screen.
76
Setting the User’s Bit
Shooting